Jump to content
SAU Community

Recommended Posts

Ok i guess other people have probably asked the same thing heaps of times and a sorry in advance, but i did a search through the queensland forum and couldnt find anything on it. Basically im looking for a workshop in brisbane or surrounding (gold coast) to do some work to my engine and tune the power FC without airflow metres. But i dont want to be stuffed around, ripped or have my engine blown up during the tuning. Need a reputable shop. People have suggested mercury and apc. But dont think i'll be going to apc because of a thread i was just reading (thanks) . Are mercury as good as everyone says they are? is there any other shops that are good with GTRs?? Anyway hope someone can help. Cheers

Link to comment
https://www.sau.com.au/forums/topic/85786-building-and-tuning-a-gtr/
Share on other sites

Your going to hear bad things about all workshops.

APC are good, mercury are good. 101s tuner is good. Matty Spry at PITS is good.

Thing is, which PFC do you have? Cause if you have the normal one, I dont think you can just take off the AFMs...

If you want stuff done on the motor as in rebuild/headwork go see JH Hill.

I am a big fan of Chapman & Chapman, the guy doesn't have a workshop full of race cars for no reason. Its sometimes takes a while, can be expensive but the work is always A1. Has done many many GTRs, there is always at least one in the shop. Just don't go in there like you are an expert on everything, otherwise you will just be walking straight out again :(

I am a big fan of Chapman & Chapman, the guy doesn't have a workshop full of race cars for no reason.  Its sometimes takes a while, can be expensive but the work is always A1.  Has done many many GTRs, there is always at least one in the shop.  Just don't go in there like you are an expert on everything, otherwise you will just be walking straight out again  :P

Yeah ive had work done with Chapman & chapman and i was impressed with them. Just dont think they had a 4 wheel dyno. Sorta looking for a place where i can get it all done at the one shop. I live about 6 hours away and i work heaps so its just about convenience. VERY impressed with all the cars in his shop too.

I am getting a D-jetro computer and stuff. so yeah.

I just need some advice, maybe someone has done a bit of work to there cars at a shop and where very impressed, and i also know about word of mouth about workshops. anyways

Cheers.

I highly recommend Andrew Chapman as well :ph34r:

you can get all your work done at his workshop, including scaling and wheel alignment. He does street tune though but you can definitely expect to see positive results.

I highly recommend Mercury Motorsports ! They tuned my PFC and got more power than I ever thought possible on an awesomely safe tune ! Especially considering I live int he hot ol' tropics .. they tuned it on a cold as day and I still never see knock above 20, even when it is hot up here !

Highly, highly recommended ... hmmm ... I think you even get 10% discount for being a SAU QLD Member ??

I've heard from some people that d-jetro can be a pain in the ass to tune, I know that Mercury have said that they can tune them but at the same time the recommended not to use one. How much hP do you plan to make? Cause you see GTRs making 450rwkw still with Z32 ones. Is the d-jetro really worth the extra hassle?

From my recent research the D-Jetro isn't the recommended upgrade.

Unless theres more information/mods you haven't told us about.

I wasnt really aiming for that much, but i done a fair bit of research last night and decided not to go with the dejetro. Aparently Mercury can't tune them atm either, waiting on some program or somthing.

I was only going for around about 350rwkw. I guess i'll go with chapman for all the work and maybe try mercury for the tuning. But im still in the process of aquiring all the parts. But i just thought i'd plan ahead first.

Anyone got a pair of Z32's for sale??? haha

Thanks for the help people

Cheers

Well, if you are after those sort of numbers, then just get a normal power fc, as I've been down the D jetro road and have hit a few brick walls.

btw 600rwhp is achievable (not by me) on a normal PFC with the right AFMs

and I've been told by friends from nipponland D jetro on the street suck arse (economy/idle) and I went against their advice Doh!!!!!

So back to the plain old pfc.

Edited by hungry6

getting the right parts before going in is always a good idea. Be prepared to wait a while to get your car back on the road again becos quality work = quality time :D

just outa curiosity, what sorta gear are you getting for your car?

hi, i would also try Charlies Motors. They have left me with a very reliable safe tune. Also been to PITS and i have no real complaints. Charlies were really prepared to go the extra distance to ensure the car was running perfectly though.

Mercury MS has a really good setup also, but not sure about tuning GTR's?

Cheers,

Francisco

twin trust t517z, nismo injectors, aftermarket turbo manifolds, power fc, exhaust, umm well pretty much the standard mods, just keeping the engine as is for now and seeing how much i can get out of it. Saving for a os giken 3L haha. might be saving a while. BUt i was reading an old article in HPI and they got 340 out of there skyline with basically the same mods. They were trialling the t517s against the 25-30's. Should have all my parts with in 2 weeks. But i wont have my licence back til november so ive got plenty of time to stuff around with the car. Just didnt want to do the turbo's myself because i work out of town and i leave all my tools out there, plus its a shit of a job.

But cheers for the help guys. Fully appreciate it

jwah, when reading magazine quoting power figures, take it with a grain of salt, also the other question, you also have to ask, is how long it's gonna last at those figures, any car can make larger than normal figure, but it's useless, if you have to rebuild the motor every other week end.

hmm i know it'll probably cut the life of my engine by alot. But it doesnt really bother me because i'll be putting a new bottom end in it in the near future.

I have also been told by others what power they have got with the similar setup. But im not saying i will get like 350kw, but i can set a goal i guess? I wont be disapointed if i dont get it. But yeah i just thought i'd give it a go. I dont see why not push the standard engine to its limits, if ya got the money to fix it then i say go for it.

Edited by jwah

dont get d jetro... its a pain in the arse to tune for a daily driver car....

2 z32 afms are good for 600 plus rwhp... so why bother with d jetro for maybe 20 more hp..

apc are good with power fc they have laptop software for all gtr power fcs...

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...