Jump to content
SAU Community

D1 Drift And Racing Piping Kit


Recommended Posts

Look no further for a top quality piping kit, buying direct from the supplier...

What I'm and selling you here is a kit that is becoming more popular day by day. See the group buy threads, see nissansilvia, everyone is extremely happy with the purchase..

Before you ask, no it's no made from copper, no it's not chromed, no the welds don't look like it was made buy a 2 yr old.

These kits are made from aluminum which are highly polished on the exterier, close to a mirror finish. They have 2.5" piping with the boost nipple already welded in. The silicon is 3 ply. The kit also comes with the necessary nuts and bolts to mount it in your car. Also since there are 4 pipes in the kit for the R32, R33, R34 it is actually easier to install, more forgiving to imperfections during the installation process

How much 390 delivered!! if you want a cooler I can do that for $200 extra delivered (600 x 300 x 76mm hybrid style cooler)...

resellers are welcome to inquire for bulk buying...

post-11183-1125313831.jpg

post-11183-1125313868.jpg

post-11183-1125313971.jpg

post-11183-1125314016.jpg

post-11183-1125314062.jpg

post-11183-1125314090.jpg

Link to comment
Share on other sites

  • 2 weeks later...
 Share



  • Similar Content

  • Latest Posts

    • Inside and outside ESCON Field in Sapporo in Hokkaido
    • Gday gents, been having a issue for a little while now and have come for some advice. car is a r34 gt-four (awd na sedan), when taking tight corners such as car parks and roundabouts feels as if the diff is locked on both ends, have literally snapped 3 shafts and issues doing my head in. Car has 60k klm so mechanical failure in the diff is unlikely but possible, been to 2 very reputable shops near where I live and both have had no luck. What would be my process of trying to find the cause? not too interested in pulling apart transfer cases just to find nothing, have these cars come out with electronic BS that might cause this? not too mechanically inclined so any information will probably be passed on an expert thanks in advance 
    • I realise that perhaps no one will in Japan will see this, but why not try anyway. What are you driving in Japan? I have a (sniff (;_;) ) 2018 Toyota Corolla Sports 1.2L Turbo 6MT. It has a class trailing 116PS and 190Nm power/torque... 😐 Why? Because back in 2018 there was only 1(?) manual transmission car available from Toyota which was the 86 (not including the Mark X GRMN 2015/2019), so when they released this one I had to support them by getting one in the hope that they would continue to release more manual models. As it turns out they released the Supra, Yaris, and GR Corolla all with manual transmissons after that. Mods are RSR Ti2000 Down springs, HKS panel filter, 18x8.5" Weds Sports SA-20R Face F with 215/40R18 Toyota Proxes Sport tyres. Eventually a full exhaust, boost controller sub-con, Blitz turbocharger and aero parts will be added before it gets replaced... 
    • It looks proper factory fitted. It's exactly how I would do it. Well done 👍
×
×
  • Create New...