Help With Rear Spoiler

[ICER33]

just wanting some peoples advice with removing the rear wing on a s2 r33. i have removed the two bolts from underneath and am not quite sure whether the stuff holding it down is the dreaded sickaflex or another type of adhesive.

if anyone has some tips on how to counter this problem it would be much appreciated.

thanks

[Nozila]

im sure there are more than just bolts underneath the wing. i remember when i removed mine i had to undo clips also, lots of clips which acted as clamps.

[Mumbo#5]

ive undone EVERY SINGLE ONE and my win is glued on or some biz... its seems like a strange wing too.. it doesnt have a brake light and is really quite large stands about 15-20cm in the air... anyone know what type of stock wing it is cause its still has the stock bodykit...

[lingeringsoul]

lol....i tried to do it once.........spent two hours trying to figure it out.......ended up almost removinf the complete boot lid........but the wing just won't come off.........sme one do a DIY guide would be nice

[onBOOST247]

lol....i tried to do it once.........spent two hours trying to figure it out.......ended up almost removinf the complete boot lid........but the wing just won't come off.........sme one do a DIY guide would be nice

<{POST_SNAPBACK}>

removed mine about 2 weeks ago. Man that thing is not going nowhere after being there from the weather in japan.

There are 4 bolts from memory and a couple clips,. Thats the easy part.

Mine ( and probably all ) was glued down with some sort of sikaflex urethhane to stop water leaking in the holes. It was a bitch and a half to remove. Just get a stanley knife blade, and try scrape under the wing. BE VERY CAREFUL not to stratch the paint. Also use a heat gun to heat up around the glue. You have to use a fair bit of force and eventually it will come off..

Goodluck !

[blind_elk]

There was a suggestion some time ago to use fishing line to cut through the adhesive. Probably a lot safer - for the paint and your fingers - than a stanley blade.

[Greg]

As mentioned THERE ARE 4 BOLTS holding it on.

I tried to remove mine having only removed 2 bolts and was wondering why it wouldnt come off!