Jump to content
SAU Community

R34 Gtt Fault Codes

fat r34
 Share

Recommended Posts

fat r34 Collaborator

fat r34

Posted
Posted

hi people i also posted in the maintenance forums about trying to find any info on why my 34 gtt engine tcs and slip light is staying on the engine is only running on 5 cyl's at the moment no# 2 is out if thats any help can i retreive the codes somehow any help appreciated

cheers l,co

Link to comment
https://www.sau.com.au/forums/topic/86057-r34-gtt-fault-codes/
Share on other sites
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

you can, with a scan tool thingy... most workshops should have them, the Nissan models are loaded onto the cards they have for them..

i can't for the life of me remeber the error code, but the code that i'm sure would come up refers to an "ignition" problem. 99% it's your coilpack which is dead, seems to be common for the 34's. I've got at least 1 dead one... how did you know it's ur #2 cylinder?

does the car sounded like a WRX? :D

Engine light is common on bcos of the ignition error code being thrown out and for some reason this renders the traction control "temporarily unavailable" you'll know when you're going around a wet corner :)

So yeah, 99% coilpack. TCS and Slip together means the traction control is offline.

OPTIONS:

- Buy Splitfire coilpacks, expensive

- Buy 1x Nissan coilpack, $100 (new) and hope the others aren't on their way out :D

cheers,

chinny

fat r34 Collaborator

fat r34

Posted
  • Author
Posted

I know it is number 2 because it is the only cylender that doesnt affect the idle when i remove the coil pack connectors one at a time, i also suspected the coils but for some reason it has done this before dropping one cylender but last time one cut out no engine light or anything came on and after the car cooled it came back but like i said no engine or tcs light were shown,

cheers l,co

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...