Jump to content
SAU Community

Recommended Posts

Hi All

Before you say "Do a search", i have, and couldn't find anything even remotely close to what i'm about to ask :huh:

First Question:

Does anyone know the weight of a standard R33 GTS-t / S14 Rim? (16 x 6.5) (Rim Only) or have one laying around that they could weigh or something please?

Second Question:

I'm looking to upgrade my rims to some 17" ones, and have been looking around for something that i like, and have come across these ones from 'Ozzy Tyres'... i'm just wondering if anyone has had any experience with this company/ their rims?

they are:

Ozzy Racing - RS GT

mag_104_173_bg.jpg

17 x 7

They told me they weigh in at around 6kg each, which isn't too bad for $220/rim

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/
Share on other sites

the 17inch rims you are looking at are $220 each. forged japanese quality wheels are around $900 each. that should tell some of the story. on a heavy car like a GTR i would be a bit concerned about using cheap chinese cast wheels.

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1577692
Share on other sites

the 17inch rims you are looking at are $220 each. forged japanese quality wheels are around $900 each. that should tell some of the story. on a heavy car like a GTR i would be a bit concerned about using cheap chinese cast wheels.

I got my 17x8.5 and 17x9.5 Jap wheels new for $1500/set after agent fee (from Yahoo Auctions), delivery, customs duty and tax.

Auction price was a tad under 70,000 yen. (~$900AUD = $225AUD each wheel)

wheel1.jpg

wheel.jpg

They are Semi-Solid Forged wheels that were made by SSR and rebadged and sold under a different name.

$900/wheel is a bit extreme for 17's? nismo's?

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1577744
Share on other sites

semi-forged? you could say then that they are semi-cast. that is not the same as a forged TE37 or LMGT4 or CE28N etc etc. have a look at how much these cost. sounds a bit suss mate, made by SSR but sold as no-name? and anyway they didn't cost you $225 a rim did they? they cost you $350 a rim. i'm not saying all cast rims are shit, but just that a $200 rim from ozzy tyres doesn't instill any great confidence in me. i may be a sceptic though.

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1577828
Share on other sites

Forged rims are harder and lighter but more brittle. This means it takes more to bend them, but they are more likely to crack. Cast wheels are softer and heavier, but not as brittle. They are more likely to bend than crack.

Simplistically, there are 2 types of cast alloy wheels, the more common is gravity cast. This means the molten alloy is simply poured into the mould using gravity ot fill the mould. The less common type is pressure cast, that means the molten alloy is forced into the mould under pressure. Pressure cast alloy wheels are a half way between forged and gravity cast. They are not as brittle as forged and yet stronger and lighter than gravity cast.

Bottom line, forged wheels are not always better, it depends on the application. Then there is the budget consideration, judged as a purely performance upgrade, forged wheels are simply not good value for money.

Back onto the main subject of this thread, wheel weight. Personally I find it very frustrating that the wheels manufactures don't publish the weight of the wheels. You can easily find the diameter, the width, the offset, the colours, the stud pattern etc etc . But finding out the weight can be almost impossible, many times even the manufactuers don't know how much the wheels weigh.

So every time I go into a wheel shop now I ask, how much do those wheels weigh? Even if I am not interested in buying them. I figure if I ask enough times they might get the hint that's its important to the buyers and publish them.

If we all do it, it will happen faster.

:( cheers :)

Edited by Sydneykid
Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1577926
Share on other sites

Bottom line, forged wheels are not always better, it depends on the application.  Then there is the budget consideration, judged as a purely performance upgrade, forged wheels are simply not good value for money.

:( cheers :)

agreed, but they make you feel like you are cool :)

don't tell me you wouldn't have a set of nice TE37s or LMGT4s Gary... :)

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1577941
Share on other sites

agreed, but they make you feel like you are cool :)

don't tell me you wouldn't have a set of nice TE37s or LMGT4s Gary... :)

No I wouldn't, because some idiot would run into them on the race car, that's wheel to wheel racing :) . Or some crook would steel the tow car just for the rims :( . Plus I can spend the $2K on something that will make the race car go faster than what saving a handfull of kgs with forged rims will.

:) cheers :)

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1577964
Share on other sites

semi-forged? you could say then that they are semi-cast.  that is not the same as a forged TE37 or LMGT4 or CE28N etc etc. have a look at how much these cost. sounds a bit suss mate, made by SSR but sold as no-name? and anyway they didn't cost you $225 a rim did they? they cost you $350 a rim. i'm not saying all cast rims are shit, but just that a $200 rim from ozzy tyres doesn't instill any great confidence in me. i may be a sceptic though.

Fair enough about being skeptical.

It's called Semi-Solid Forging.

SSR have been using it on a few of their wheels for awhile.

http://www.tirerack.com/wheels/ssr/ssr.jsp

No they didn't cost me $225/rim but if you imported a whole container load. You'd most likely get a discount I'd say. ?

I've attached a pic of the sticker that was on the wheels if you thought I was lying. :(

post-1432-1126493897.jpg

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1578066
Share on other sites

bump... anyone else?

hey mate,

6kg per 17" cast wheel is VERY light

if a wheel is cast generally speaking the heavier the stronger. so bottom line those rims being cast and light would not be strong, and will probably buckle easily

a typical cast 5 spoke design wheel 17x7 weighs about 8.5kg

a typical forged 17x7 weighs about 6.5kg.

so i find it VERY hard to believe that the wheels u are looking at are in fact 6kg and if they are i would stay away :(

tell them to put it on a scale and i bet u they weigh more anyway.

and for the record, SSR rims are strong rims and a good compromise between the two processes read the website or google it.

i have attached a pdf with lots of wheel weights for your info. (the values look correct to me)

wheel_weight_alpha.pdf

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1578120
Share on other sites

No I wouldn't, because some idiot would run into them on the race  car, that's wheel to wheel racing :( .  Or some crook would steel the tow car just for the rims :P .  Plus I can spend the $2K on something that will make the race car go faster than what saving a handfull of kgs with forged rims will.

:) cheers :)

ok ok, then what would/do you use on the race car then?

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1580348
Share on other sites

Hey, out of curiosity, I just weighed a Nissan R33 gtr factory wheel I have. It weighs around 9.5Kg, and that's a 17 x 9 inch forged wheel. If a pressure cast rim is only 6.5Kg then it must be very thin or weigh more than advertised.

hey mate,

6kg per 17" cast wheel is VERY light

if a wheel is cast generally speaking the heavier the stronger. so bottom line those rims being cast and light would not be strong, and will probably buckle easily

a typical cast 5 spoke design wheel 17x7 weighs about 8.5kg

a typical forged 17x7 weighs about 6.5kg.

so i find it VERY hard to believe that the wheels u are looking at are in fact 6kg and if they are i would stay away :D

tell them to put it on a scale and i bet u they weigh more anyway.

and for the record, SSR rims are strong rims and a good compromise between the two processes read the website or google it.

i have attached a pdf with lots of wheel weights for your info. (the values look correct to me)

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1581697
Share on other sites

i'm guessing the guy picked a random number out of the air to shut me up... as the conversations is as follows (cut & paste):

Me: "Hi, I was just wondering if you could tell me how much one of these rims weighs [referring to RS-GT], and what offsets are available? Also, do you have a 'rough' RRP for them?

Ozzy Tyres: "What size r u after ??"

Me: "sorry mate... 17 x 8,

5 x 114.3"

Ozzy Tyres: "17” 4 weeks away

18” avail in shadow chrome $2000 incl tyres

If you want the 17” place your order to guarantee

availability"

Me: "How much for just the 17" rims only?

what about 17" rims with tyres... what sort of price are they?

and also, what tyres do you guys use?

and any idea on the weights?"

Ozzy Tyres: "$220 per wheels

$1500 incl tyres

Tyres low profile to match the car

6kg"

Now, not only did the guy take half a dozen emails to answer a few simple questions, he sounds like he's all of about 10 years old with his fullee siik speak, bro, and still didn't answer half of my questions!

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1582071
Share on other sites

On a race car? Speedy holotype R $200 each in 17x8 nice and strong. Not particularly light, and they look dead ugly :)

For targa we run the Weds they are heavier but also nice and strong, neither we nor the just jap guys have buckled one in a heap of targas between them. Like Gary said they crack instead :(

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1582170
Share on other sites

So what difference does a lighter rim make? As 99.9% of us wont be wheel to wheel racing as most of our cars are road cars, with maybe a bit of track work every 3months.

More so, as its rotating mass, does it make a difference. Just interested to know, my rims arent going anywhere no matter what. Just good to learn.

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1582189
Share on other sites

On a race car? Speedy holotype R $200 each in 17x8 nice and strong.  Not particularly light, and they look dead ugly :)

Duncan,

I run these on my road car, one developed a crack right through one of the spokes.

Sent the wheel back to Speedy, they replaced it. Apparently, it's pretty unusual

(a) for a spoke to crack without bashing the wheel into something

(B) for a wheel maker to replace a broken wheel 'just like that'

(it means they've accepted that there was something wrong with the wheel originally).

I think this was just 'bad luck' (the wheels are still on the car). For those that aren't

racing (and not checking the wheels every time), it's worth the trouble to start

doing it ;)

Regards,

Saliya

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1587263
Share on other sites

On a race car? Speedy holotype R $200 each in 17x8 nice and strong.  Not particularly light, and they look dead ugly :)

They look ugly to you because you only see them from the rear. :lol:

If they were in your rear vison mirror they would probably look OK then. :D

:P cheers :)

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1587637
Share on other sites

Don't know whether this helps, but I just weighed a standard R32 gts-t rim + tyre I have here and its 18kg. I'd assume that this would have to be similar to R33 unless its a different material.

Guess you'd have to work out much a tyre+air weighs.

Are there any formulas to work out the weight of air in a tyre at say xx PSI ? Must be I'd imagine...

Link to comment
https://www.sau.com.au/forums/topic/87297-rim-weight/#findComment-1588842
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...