Jump to content
SAU Community

Recommended Posts

1 piece wheels are usually cast and usually heavy but probably better for all round on road use.

The 2 and 3 piece wheels are usually much better quality, forged and much lighter ie my 18x 9 Weds Sports Racing wheels with 265 35 tyres are lighter than the stock 16x6 with 205 55.

Hi,

Just want to get an opinion from those in the know.  Whats the big deal with three piece wheels anyways? Or two piece for that matter?  how are they better compared to one piece wheels tht can be bought at wheel shops in oz??

Cheers

Jon

A two piece rim is as good as a three piece, so don't get too hung up about it. A three piece allows the manufacturer to vary the rim offset& width without having to utilise a heap of different production options.

A two piece will usually be lighter than a one piece, because the transition from the centre section to the outer section is not dictated by casting considerations. One of the key criteria (for me anyway) when buying rims is their weight. The lighter the wheel - the lower your unsprung mass which is all to the good. You will find much of what is sold in the local tyre shops is ex China & some of them (Not all!) can be quite heavy. As with most things - you get what you pay for.

I always wanted to know that too. What arre the advantages of lighter rims?

Put simply, the main advantage from lighter wheels is a lower unsprung mass. The job of the springs/dampers/roll bars is to keep the wheel/tyre on the road surface. Obviously the lighter the wheel/tyre combination the less work the suspension has to do to keep them on the road. End result: more grip.

A secondary benefit is that it can reduce the vehicle mass as a whole. A light set of 17's can be up to 10kg lighter than an equivalent set of 19 or 20 inch rims.

I always thought that 2 and 3 piece wheels weren't as strong as say a forged single piece rim. I have forged Buddy Club P1's which are pretty light and tough as! Aren't say 2 piece rims composed of an interior piece welded on to the outer part of the rim? I'll bet it isn't easy to fix 2 or 3 piece rims, depending on the type of damage you have of course. 2 and 3 piece are much lighter but also usually more expensive!

"Games don't affect people. If Pacman affected us as kids, we'd all be running around in darkened rooms munching on pills and listening to repetitive music."

I always thought that 2 and 3 piece wheels weren't as strong as say a forged single piece rim. I have forged Buddy Club P1's which are pretty light and tough as! Aren't say 2 piece rims composed of an interior piece welded on to the outer part of the rim? I'll bet it isn't easy to fix 2 or 3 piece rims, depending on the type of damage you have of course. 2 and 3 piece are much lighter but also usually more expensive!

"Games don't affect people. If Pacman affected us as kids, we'd all be running around in darkened rooms munching on pills and listening to repetitive music."

2 piece rims have the centre section bolted to the outer, not welded. I have had mine repaired, you just have to unbolt the outer section first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...