Jump to content
SAU Community

Recommended Posts

Hey guys n girls,

These are suitable for just about any Nissan except the S15 and R34.

Doh! i cant even use one of these myself!!

$89 + $5 postage

nismokey.jpg

also have genuine Silvia badges for any S13, S14 and S15 owners in 'ere.

Edited by JDMimports
Link to comment
https://www.sau.com.au/forums/topic/87819-nismo-blank-keys-available/
Share on other sites

thats a good question. i have not trialed these keys on a R34 to see if they fit the barrel. Perhaps somebody on here may have an answer.

Nismo did produce keys to suit the S15 and R34 once upon a time. They do have a different item number.

These nismo blanks do fit the barrel of the S15 but unsure if the same applies the the R34.

  • 2 months later...

are they the same as the r32 GTR keys?? i have the original for a gtr key and its is fairly worn, so im looking at replacing it soon!! do you have the keys with 'gtr' insted of nismo?

thanks

Turbz,

We actually ordered some of those at the same time as the Nismo blanks.. when we received them, they all happened to be Nismo blanks rather than a bunch of each.

The back of the box indicates that these Nismo keys are infact suitable to the R32 also.

We are considering an additional order for more keys due to their popularity. These would include the GTR blanks also.

Hopefully we will have these available by Christmas.

cheers

  • 4 weeks later...

hey, i just got mine from nengun, and i just thought i'd let everyone know that they dont really look like the 1 in the top pic. they still look ok, but i was expecting the 1 in the first post, as thats what nengun show for the ad as well, but they are like that GTR 1 posted above, only gold in color...



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...