Jump to content
SAU Community

Recommended Posts

so hang on, is my suspension crap or the tyres? i thought theese were good tyres, at $400 each fitted they would bloody well wanna be good tyres. whats some good tyres

direzzas (dz101s) are decent tyres for the power u have, it will be your suspension that u should fix..

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Try your suspension ($100 i surely doubt it) but honestly i don't think its going to fix your problem. You've got some decent power, enough to spin your wheels and hence why your asking the question. I have more power than you and stronger torque and i could wheelspin 2nd gear on the role everytime. It was fun but it was becoming a joke. Rear camber was checked and pineapples for squat fitted but didnt do enough. I even tried stock suspension to get some squat, but that didnt do enough either.

Fitted some R compound rubber and bingo, i can get traction in 1st. As i mentioned in another post, it now launches like a GTR. Ask Silva33, he's been in my car on launch and was outstanded.

which tyres did you get ?

Fitted some R compound rubber and bingo, i can get traction in 1st.  As i mentioned in another post, it now launches like a GTR.  Ask Silva33, he's been in my car on launch and was outstanded.

so hang on, is my suspension crap or the tyres? i thought theese were good tyres, at $400 each fitted they would bloody well wanna be good tyres. whats some good tyres

Look you have Duncan who has arguably the 2nd fastest Production Skyline in the country telling you to have a good look at your suspension. You have me who does the suspension work on arguable the fastest Improved Production Skyline in the country telling you to have a good look at your suspension. And there are 2 or 3 other guys with lots of Skyline experience telling you the same. Compared to one guy who says tyres are everything and suspension does somewhere between nothing and very little.

Don't listen to any of us if you like, but please take it to Chris at Centreline and ask his opinion.

;) cheers :)

Look you have Duncan who has arguably the 2nd fastest Production Skyline in the country telling you to have a good look at your suspension.  You have me who does the suspension work on arguable the fastest Improved Production Skyline in the country telling you to have a good look at your suspension.  And there are 2 or 3 other guys with lots of Skyline experience telling you the same.  Compared to one guy who says tyres are everything and suspension does somewhere between nothing and very little.

Don't listen to any of us if you like, but please take it to Chris at Centreline and ask his opinion.

;) cheers  :)

We are talking street driving not a race car suspension setup.

Im no amateur and have done my fair share of drag racing (not track racing).

Your call mate, believe SK who probably has never lived with an R33 as a daily driver and has experienced the frustration that you have. Or believe me, who has experienced your frustration but has fixed the problem. Your only as good as the rubber lets you.

We are talking street driving not a race car suspension setup.

Im no amateur and have done my fair share of drag racing (not track racing).

Your call mate, believe SK who probably has never lived with an R33 as a daily driver and has experienced the frustration that you have.  Or believe me, who has experienced your frustration but has fixed the problem.  Your only as good as the rubber lets you.

You are correct, I have never lived with an R33GTST as a daily driver, however I do have an R34GTT with 265rwkw that has run an 11.9 at 120mph on radials that I drive almost every day. And once again you are right, I have never experienced the frustration that you have, maybe because I set up the suspension before I touched the engine.

If you want wheelspin frustration you should try the R32GTST with 420+rwkw, now that's a whole different ball game.

:D cheers ;)

I know of the R34 you are talking about, featured in Zoom and HPI videos? So what tyres are you running with on the street? Nittos? I know thats what you used on the strip.

I make a deal with you, if you can fix this guys problem with only suspension mods, i'll be your next customer.

We are having enough problems with 200+, 420rwkw would certainly require a good steerer.

I know of the R34 you are talking about, featured in Zoom and HPI videos?  So what tyres are you running with on the street?  Nittos?   I know thats what you used on the strip.

I make a deal with you, if you can fix this guys problem with only suspension mods, i'll be your next customer.

We are having enough problems with 200+, 420rwkw would certainly require a good steerer.

No, that's Ben's R34GTT, well ex-Ben anyway, he sold it after they tried the GT30 turbo upgrade. The guys at Whiteline used KYB shocks on his, mine has Eibach springs with Bilstein shocks, as I prefer them. I used MT ET radials on ours for the 11.9, couldn't drive with them on the street, absolutely useless around corners and dangerous in the wet. We have found them to be much better than the Nittos on the track though. On the road it runs my usual choice, Michelin Pilot Sport in 245/40/17 on the R33GTR 17X9's.

Yep, the 420+rwkw from the RB31DET in the R32GTST is quite nice, it has 245/45/17 A032R's on it. One day I might stick the MT's on it and try for a time, it should do a mid 9 at around 145mph. That's if I change the suspension settings from its current circuit spec. At the moment it would be lucky to do a 10, too much rear camber, anti squat geometery, bump valving in the shocks, toe in and the spring rate is a little high.

Just because I am a circuit racing specialist, doesn't mean I don't do drag cars.

:D cheers ;)

Edited by Sydneykid
So hows the Michelins in normal road use when you give it a bit of curry in 1st and 2nd??

Damn good, but after 30+ years of racing I have pretty good throttle control. Let's face it with 265 rwkw and power from 4,000 rpm to 8,000 rpm I hardly ever meet a car that I realy have to try to beat anyway, up to the speed limit of course. The roads in Sydney are never flat, so the suspension is very important in gaining the necessary traction via improved tyre contact with the road surface. Then there is always a corner, where the gap just grows expedentially.

:P cheers :D

  • 5 months later...

Hi Guys,

Been a while since I posted in here but here's an update of where I am;

I have sorted out the Active-LSD problems (no more single spinner diff)

I have brought two new hankook 255x40x17's for the rear (35psi on all 4)

Today it's at Centreline getting the following done;

Camber Kit front and rear

Castor Kit front and rear

Pineapple Kit for the rear

4 Wheel align and balance

Can't wait to see how she handles after all this is done, will pick up at the end of the day. I think active LSD was a big let down for my car as it never worked, but works happy happy now that's been resovled and works all the time

Fitted some R compound rubber and bingo, i can get traction in 1st. As i mentioned in another post, it now launches like a GTR. Ask Silva33, he's been in my car on launch and was outstanded.

if your car is launching like a GTR you should be pulling much better 60ft times that 2.03. i would think any numbnuts (namely me) can do a low 1.8sec 60ft in a car launching like a GTR (namely a GTR).

I didnt think the RA-1s were an R-tyre? they look like a street tyre to me. the RE55s however are a hole other ball game.

if your car is launching like a GTR you should be pulling much better 60ft times that 2.03. i would think any numbnuts (namely me) can do a low 1.8sec 60ft in a car launching like a GTR (namely a GTR).

I didnt think the RA-1s were an R-tyre? they look like a street tyre to me. the RE55s however are a hole other ball game.

Your wrong , the 2.03 was done on Sumituno's street tyres not the RA-1. I haven't been to the track yet with the RA-1's but judging by road traction, they are 100% better than the Sumo's.

They are very similiar to the Re55, some guys who have had both reckon they are better, but anyway im not complaining at all, traction is simply brilliant. Guns running big horsepower should certainly look at their tyres to get some rubber down on the street.

paul,

I noticed a huge improvement with the pineapple kit... my car comes on boost hard with 18psi low in the rev range and stock suspension and very rarely get wheelspin since installing them alone..

Before the pineapples it used to spin 2nd like robo's every time and thats with semi slicks

good luck

the toyos are these ones?

ra1-tire-large.jpg

these are the RE55s very different looking:

GK02-.jpg

i stand corrected on the short times thing. new tyres should make a good difference. I'm just not convinced that those RA-1s can perform as well on track as the RE55s or A048s or even RT215s which have vastly more contact patch.

The first tyre pictured is the RA1 and while not in the league of the re55 it will certainly produce better lap times than the RT215 . Toyo make the R888 to compete with the bridgy and it has has very good results , compared to the equivelent yoki AO48's at the recent historics( which it has been recently approved for ) round at PI.

adam.

Edited by FLYGTR

well after all the suspension stuff is done i have to go back in 1000k's and have all the bolts and stuff checked. it seems to handle a stackload better, no more wishy washy handling when you bag it up at the rear. the axle tramp has been reduced but some is still present.

when u go sideways it seems to go the way u point the wheels instead of sliding and carrying on which is tops. the rev limiter seems to come up stacks quicker as its more interested in gripping than spinning now :) also on the freeway is tops, the car goes straight, doesnt wobble and carry on (steering wheel).

all in all very very happy but unfortunately suffered exhaut gasket failure on the same day so ill have to get that sorted. chris has suggested (spoke to him after a quick road test) that we try the "drag" suspension setup at the 1000k check but he said that normal suspension performance is hampered a little when in the drag launch setup, as its a comprimise. currently im on best all round performance.

The first tyre pictured is the RA1 and while not in the league of the re55 it will certainly produce better lap times than the RT215 . Toyo make the R888 to compete with the bridgy and it has has very good results , compared to the equivelent yoki AO48's at the recent historics( which it has been recently approved for ) round at PI.

adam.

Yeah, that's what i had though. as i have used the R881 (both GG and GGG compound), and R888 which are semi-slicks so i wasnt sure where the RA-1 was in the scheme of things. i thought maybe it was an R881 replacement, but it has street tyre looking tread so i was a bit confused.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wrt the engine, you're very much limited by 'production quality' as to how much extra power you can extract from them (I'm talking i6 red-motor) -- a lot here depends on how 'authentic' or 'period correct' you want the modifications to be... ...I'm too old... <grin>...the first true performance engine Holden made, was in the HD/HR models ~ this was the 'X2' performance pack...it came with twin downdraft strombergs on an otherwise unimproved intake manifold, with a two piece exhaust manifold (reckoned to be as good as extractors)... ....these engines were built upon the '179HP' cylinder block, which included extra webbing in the casting to make it stronger and less susceptible to block distortion... The next performance i6 came out with the HK Monaro (also found it's way into the LJ GTR Torana ... the car I wish I hadn't sold)...it had pretty much the same manifold setup, but was built against the '186S' block...this block retained all the extra webbing of the 179HP block, but added a forged steel crankshaft (instead of the stock cast crankshaft), because it was possible to snap the crank... ...apart from the inherent weaknesses in the stock (cast crank) blocks, the next limiting factor is the cylinder head porting & combustion chamber design, and the actual valve sizes. Back in the day, you could buy a 'yella terra' cylinder head (from stage 1 to stage 5 gradients), and this was the way to get serious power out of them -- with the extra breathing of these heads, you could fit a triple SU or DCOE Weber setup... ...obviously, these mods were a waste of time on a stock cylinder head/camshaft grind. My housemate rebuilt the i6 in his VH dunnydore about 6 months back -- this is a 186S block with the 12port 2850 blue motor head and intake/exhaust manifolds, with a dual throat Weber off an XF Falcon mounted on an adapter plate ; it's not a bad makeup...got more torque & fuel economy just light-footing it about on the first throat, but stand on it and it makes more giddy-up than the standard 2850 blue motor that it replaced. Personal note: I'd just fit an RB30 and be done it it 馃槂  
    • Thanks for sharing. That's a great video! My buddy is doing the same thing on his build (S chassis struts and towers). He's building an S14 with billet RB30 shooting for 2000whp... a race car with a TH400 just like this video. For a road car I just couldn't go this route as the strut has to be almost vertical and the caster is not going to pivot correctly (let alone camber gain). You think the R32 frontend is bad, wait till you put a MacPherson strut on without modeling it all in Solidworks to check geometry. I'm not saying it's a bad way to do it but I'd be really curious to see how it affects the geometry.
    • Hey Christof and welcome!  Sounds like an awesome project! I'm not sure many of the regular users on here would know much about the HK but I could be wrong.  Looking forward to updates.
    • As long as its NOT a HyperSHITtune, youll be fine.
    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
  • Create New...