Jump to content
SAU Community

Recommended Posts

first of all I would like to say this post, and further posts are not designed to create the "workshop X are fantastic and workshop Y and a bunch of KrUn....zzzz" you know the rest, it has been done before!

For those that do not know my car this is a very brief history of the build and who has helped along the way...

R32 GT-R build 11/92 first rego 93

fresh rebuilt RB26DETT from DART automotive 3000km ago

engine:-

tomei poncam 260 260 9.15 cams

tomei sump baffles

OS cam gears

rebuilt with new internals to DART spec (ask Jim :) )

TRUST extended split dumps

HKS GT-SS turbos

TRUST FMIC

baffled cam covers

APEXi FC

BLITZ SBC spec R

3.5 inch exhaust HKS rear box

splitfire coils

iri-top plugs

700cc SARD injectors

044 in tank

SARD fuel reg

remote filter and oil cooler.... now holding about 7.5 ltrs of oil...

57mm PWR radiator

power steering cooler

HICAS removed

and it goes on...

drive line is stock apart from the Jim Berry clutch, redline fliuds in the Gbox and diff, and transmaxZ in the ATTESSA with Castrol R 10/60 for the engine

fuel is BP ultimate 98

I think that covers the power making side, there is quite a bit done to make it stop, and turn, but that can wait till I have the urge to add all that!!

I would like to thank Jim from CRD for spending the entire day today (rocked up at 0730 and walked out at 1700!) fiddling with, and bringing out nearly 100AWKW from what was essentially a great driving car in the first place!!!

basically the work done today was trial and error with ignition timing and also cam timing, however there were 4 signifigant points I should add....

1) it was found, and shown to me that the CAS (crank angle sensor) was on the way out as we couldnt get the factory 20....replaced

2) throttle was found to be opening only 85% as the nut had spun back... we now have 100% when needed

3) semi slick tyres when hot have a nett loss on the Dyno of about 10-20 AWKW!

4) Cam dialing in is worth the fuss! no question.....

Basically the people that did the hard work are BEL garage who tirelessly fitted and fettled the car, slowly getting it to the point were it will live with all this power! and DART for building such a smooth and strong engine, and adding the turbos, cams and pipes to the mix...

Jim just took it to the next level, and I am honestly stunned to how big a gain he has got!

basically I could go on, and will if asked for the details, however the numbers should speak volumes...

the pictures below have :-

1) HKS factory output on a "built" slightly oversize engine with power at the flywheel

2) dynolog dyno power run at DART with a very drivable road tune + dyno top up from BEL making 205AWKW 1.43 BAR boost and 585NM

3) CRD dyno finally 313AWKW 1.36 BAR max dropping to 1.22 BAR at peak power

thanks to all ;):):)

I will try to get a back to back run on DART's new state of the art dyno 2moro! so stay tuned....

hkspower_curve.bmp

post-16093-1126778850.jpg

post-16093-1126778882.jpg

Edited by williamsf1
  • Replies 288
  • Created
  • Last Reply

Top Posters In This Topic

I truely doubt that I will run the car on the strip.... but never say never.... the car was built to go fast around corners (as nissan designed it) and you will see me at every race track I can take it to ;) that is a promise!!!

I hope to see all the Vic boys at a PI day sometime later in the year!!!

Doesn't anyone else think that 205AWKW is VERY low for an engine with all that gear recieving 1.45 BAR? Yet this was tuned by BEL, one of the top tuners?

Or am I just being silly?

Another GTR made 280awkw on the same dyno and trapped 125mph at the drags...so go figure.

Also, a wrx made a bit over 200 on the same dyno and made just under 300kw on a dyno dynamics.

It's all relative really.

Paul as I have stated above, the BEL tune and power run you see is on a dynolog dyno, so unless you have been on one it is just a number, not relative to anything else....

I have to say honestly that the BEL tune drove like a scun cat, and all who have been in the car would agree! but CRD did get more, with less boost using cam timing etc...

2moro will give a true like for like with another run on DART's dynolog...

anytime you want to take your car to DART's dyno to see for yourself I am sure you would be most welcome...

they are at Belmore Rd Punchbowl....

cheers....

oh and well said Mik :)

edit :- coz pauly asked nicely to remove the quoted rash statement :) or maybe it was stace :S :);)

Edited by williamsf1
Doesn't anyone else think that 205AWKW is VERY low for an engine with all that gear recieving 1.45 BAR? Yet this was tuned by BEL, one of the top tuners?

Or am I just being silly?

your just being silly.

would love to have seen BEL log the air/fuel ratio's this would have been a better indication of the quality of their tune.

Did you notice the straight line on Croydon's....a hallmark of Jim's work!

What does a straight AFR curve have to do with the quality of a tune? Getting a dead straight curve isn't exactly that difficult (or important for that matter).

One thing I noticed is that it seems damn lean. I wonder why Jim choose to tune so lean...he must have his reasons. Did he say anything about it Ben?

Its the same target AFR as in Wreckedhead's dyno which I guess answers my question from the thread that was locked....Jim must be happy with 12.5 AFRs for a road car.

They have plenty of experience tuning, and there's no way I can argue....I'm just surprised they aim so lean?

Are we not looking at a built GTR engine....12.4 is on the money....take your cars back to Japan if you want overly rich power sapping mixtures. We have followed Jim's instructions and allowed him to guide us on the correct direction to follow. He must be right, as we have tortured our car for more than 2 years and its still producing world leading power/performance for our combination.

Yeah...what would the japs know...pack of dummies they are

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...