Jump to content
SAU Community

Recommended Posts

will a custom 3" catback exhaust (including a 3" hi-flow cat, everything else res/muffler are 3" straight through) be an ok option instead of forking out a grand and a half for a brand name one?(the custom job was estimated at $800) im hoping to un-restrict the exhaust system without the damn droning sound that you normally get with the brand name aftermarket systems. i was considering Greddy Power Extreme II system, anyone running one of these? sound good, not too loud?

Edited by RyanN
Link to comment
https://www.sau.com.au/forums/topic/88006-r34-gtt-3-custom-exhaust/
Share on other sites

Hi Ryan,

Short answer: "Yes".

Long answer:

The jig-made Jap stuff generally seems to have better looking welds than custom

stuff. There are also generally fewer of them (most exhaust shops don't own

a 3" mandrel bender so they will make a custom 3" exhaust out of 3" mandrel

bends so there are more joins)

There's a case to be made for 'less joins' and 'smaller welds' in terms of flow;

but I'm guessing that the difference is minimal if measurable at all for most cars.

"Droning" is a subjective thing - every exhaust will have a resonant frequency

(and most of them a corresponding RPM that it sounds 'louder' at). Hopefully this

frequency is not at cruise RPMs. Unless you just mean 'too loud generally' -

in this case, adding more mufflers (or using more effective ones) will usually

be the answer. It's a tradeoff between flow and noise - a system that flows

the best is usually the noisiest. I haven't seen the muffler yet that added noise

restriction without also adding flow restriction. If a system is custom you should

be able to add/delete mufflers at will, and your exhaust shop should also have

a pretty good idea about what a given system will sound like _before_ they make

it. Tell them what you want.

The best thing to do is go to a cruise or a track day for your model car, find the

sound of something you like, and see what's under it. Ideally, get a ride in it

if the owner's agreeable so you can hear it at different RPMs. Try find something

that's street legal :P

Regards,

Saliya

thanks for the replies; im awaiting an email for a price on the Greddy Power Extreme II system for a 4dr skyline as i think the website listed the 2dr price which was $799; about the same as the custom which would be alot easier since i wouldn't lose the car for a day. Hmmm, siliences are an ok idea but a cop traveling behind and seeing it will most likely pull me over and canary it, the idea behind the custom exhaust system was to make it look as stock as possible - even with simular dual tips; i'll have to wait till monday for price estimate on the brand name system if it too much i think i'll go with the custom system.

Edited by RyanN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...