Jump to content
SAU Community

1jz 180sx Almost Done

wannaQik180

By wannaQik180,
in Australian Capital Territory

 Share

Recommended Posts

wannaQik180 Apprentice

wannaQik180

Posted
Posted

hey guys.. i know im on the skylines forum, but figured this may interest some of u..

i've spent the past few months converting my 180sx from SR20DET to 1JZGTE... as every nissan enthusiast does, i considered the ole RB25, but at the risk of starting a flame war, didnt go for it, cause it wouldnt be able to handle the power im going for.... much the same at the RB26... altho they r both good motors, for power handling in stock form and price off the shelf, the 1J left them both for dead... but enough on that.... i should hopefully have it all done and on the road in about 4 weeks... took some pics last night, as i finally fixed all the front panel damage from the original accident (that inspired the conversion back in february).

so far, ALL work has been carried out in my garage... engine came with some goodies on it, but everything else has been my own work - mounts, panel beating etc...

when its done, i'll hopefully come along to a meet.... i bought a few bits and pieces from this forum for the conversion, so it'd be cool to meet up with some of the guys i've met along the way again.

cheers

Greg

http://www.nissansilvia.com/forums/index.p...0entry1619357

Link to comment
https://www.sau.com.au/forums/topic/88208-1jz-180sx-almost-done/
Share on other sites
leech_ Grand Master

leech_

Posted
Posted
i considered the ole RB25, but at the risk of starting a flame war, didnt go for it, cause it wouldnt be able to handle the power im going for.... much the same at the RB26...
Fits a damn sight better than an RB. Oh, that's right, cause any RB = poo

and you call yourself a nissan fan pfft. anyways nice car

Bluprint Veteran

Bluprint

Posted
Posted

Very nice conversion, I'd love to see it once it's done

I just had a look at the NS thread, looks like you're going for about 350rwkw

an unopened RB26 (or 25/Neo?) should be able to support that I guess (if you don't flog it everywhere)

But anyways, full points for doing something different, I like it.

wannaQik180 Apprentice

wannaQik180

Posted
  • Author
Posted (edited)

i considered the newer NEO engines, but when i looked at price V's power handling, the 1J won out.... i know its older, but it has been proven time and time again.... plus 700hp on stock internals and a happy redline of 8K....

aim is for as close to 400rwkw as possible on PULP... if i get some more dollars together by the end of the year, i'll see about a NOS kit, but there r plenty more things to happen with it before that.

i have some coilovers ready to go, just have to do the 5 stud and GTR brake conversion.

and yes, i do call myself a nissan fan... ask every one of the ppl i've helped and those who i've done CA and SR engine conversions for... it just sux that in the 2.5ltr class, nothing nissan has can reliably do what the 1J does... not to bag nissan as i loved my CA and SR, but the 1J came out on top for every goal i wanted to achieve - except weight distribution, but i have a 13bT on the way that will fix that :P

also, some of my favourite brown undie moments came from my mates VG30DET silvia, which i spent many months working on.... and my friend in sydney is currently working on another silvia with a VQ.... its not all about CA's, SR's or RB's for me....

.... and LEECH, the quote about RB=poo was not me.... nor do i endorse that narrow minded view... im more than sure there will be plenty of RB's that will hand me my ass and to be honest, i look forward to meeting them.. i know my car will be fast, so it will be a nice change to see an RB that has had money spent on the inside, not the outside.

Edited by wannaQik180
leech_ Grand Master

leech_

Posted
Posted
.... and LEECH, the quote about RB=poo was not me.... nor do i endorse that narrow minded view... im more than sure there will be plenty of RB's that will hand me my ass and to be honest, i look forward to meeting them.. i know my car will be fast, so it will be a nice change to see an RB that has had money spent on the inside, not the outside.

hehe i am just stirrin :D and my bad i just thought the guy posting would have been the owner :P i take back my comment but the guy that said that is a n00b :) j/ks each to their own i guess :P

wannaQik180 Apprentice

wannaQik180

Posted
  • Author
Posted

its all good... and to stir things up even more, im also seriously thinking about a 13bT... i have the parts already and i am very open minded when it comes to conversions, but i dont think i could do it... as it is, the 1J sounds like a deep, throaty rotar at idle.. those cams sound f*cking awesome, but i dont think i could do it... the handling would be sensational, given the massive weight reduction and the engine sitting well behind the x-member, but i dont know..... might just have to wait for Benn to finish putting one in his 200sx.... will be an interesting ride.... 200sx, 13bT, 400+rwkw... but until he gets that done, he'll be spouting off things like RB = poo... i just hope when its done, he does have his ass handed to him (hopefully by me)... bring him down to earth, tho i reckon the price of petrol and $150+ a week should help with that... the rotars may throw out some power, but christ they dont do it too ecconomically...

as for the blood.. i learnt the hard way that when bringing a gear box and an engine together, to keep ones hands well and truly out of the bell housing... especially when ur "mate" is pushing as hard as he can at the other end.

Nathan... how long till ben is finished with ur conversion?? also, we need to do some touch ups to that oil cooler of urs... is more like an oil warmer the way its currently set up :D

  • 2 weeks later...
  • 2 weeks later...
djhatton Proficient

djhatton

Posted
Posted
Is the 1j really able to put out 700 hp on stock internals? I shouldnt really be surprised but that is a lot. How reliable will that be. How does a 2j go comapred to a 1j how hp can they put out on stock internals?

it depends entirely on the tune, but lets just say that neither 1j nor 2j (or most factory powerplants lets face it) wouldn't be holding together for a long time...

the toyota engines are tough as nails, yes, but they're not unbreakable. i'd like to see a 1j with 700hp last indefinately...

d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...