Jump to content
SAU Community

Recommended Posts

The RED one is a NICS engine. It is the earlier of the 2. And has less power.

The NICS has 2 inlet runners per cylinder, 1 of which has a butterfly that opens and closes depending on the requirements. These tend to jam, so that the engine is either terrific down low and crap up high, or crap down low and terrific up high.

The heads are different, but interchangeable (I know the inlet manifolds are not interchangeable).

That's my limit. Anyone else add or correct.

The RED one is a NICS engine.

Greg you are correct in your description of the early NICS engines, but there was also a red-top ECCS version of the RB20DET which was used in HR31's from about mid 1987. The red ECCS uses a very similar manifold setup to the R32 silver type - in fact it looks largely identical, but there might be detail differences. The (rough) power output of the three types is:

NICS - 140kW

red ECCS - 150kW

silver ECCS - 160kW

Probably the main differences between the R32 ECCS and the R31 ECCS is that the R32 used a ball-bearing turbo (R31 used plain bearing) plus the R32 had a more refined engine management system. That said there are probably internal detail differences, but I haven't compared them.

To complicate matters somewhat, the silver ECCS engine was also used in some late model Cefiro's, but for some reason the Cefiro version used a plain bearing turbo (like R31's) - well that's what I'm lead to believe, anyway.

Nics and red eccs are both 12 port heads and silver is 6. The red eccs actually also has the same inlet butterflies as the nics but has a 6 runner manifold like the silver.

There are many minor differences between the silver and red eccs like injector sizing, impedance, fuel rails, throttle body sizing, sensors, ecu etc. Do a search as it was covered very recently.

In what way? I have a red eccs in the GTS-R and its 100% a 12 porter and it 100% had the butterflies as I removed them.

Its not uncommon for people with red top eccs engines to ditch the butterflies and manifold and use the silver top gear instead. If the head was never removed they would never assume it was a 12 porter.

I myself never knew it had 12 ports untill the manifold was removed.

The below pics are butterflies and a head from a GTS-R which has a red eccs as standard.

post-7700-1127542397.jpg

post-7700-1127542438.jpg

In what way? I have a red eccs in the GTS-R and its 100% a 12 porter and it 100% had the butterflies as I removed them.

Its not uncommon for people with red top eccs engines to ditch the butterflies and manifold and use the silver top gear instead. If the head was never removed they would never assume it was a 12 porter.

I myself never knew it had 12 ports untill the manifold was removed.

The below pics are butterflies and a head from a GTS-R which has a red eccs as standard.

You are exactly right Jayson.I too had the head removed from my old red top eccs Rb20det-r and it looks exactly the same as your picture(12 ports),even though it had the 6 runners on the plenum.Cheapest power upgrade for top end power has to be to remove the butterflies.Shit job though.

Does someone have a picture of a silver top Rb20 head,i would like to see the difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...