Jump to content
SAU Community

Recommended Posts

Guys,

I am changing the diff and gearbox oil shortly.

Is there a sort of oil that i should use for the diff and gearbox?

Gearbox: oil?

Diff: oil?

Engine: oil?

What my previous car (VL with SubZero build RB25DET), I used Mobil 1 for the engine. What oil do people recommend to use with a standard engine, not using any oil at all...

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/89831-enginegearboxdiff-oils/
Share on other sites

redline mt-90 for gearbox

then maybe motul or mobil1 for engine

(actually i use pennzoil 10w40 for engine oil. works fine for me... make sure your engine oil is quality and correct weight, but i wouldn't go spending $100 for an oil change with redline stuff. just make sure you change every 4000-5000kms)

probably redline for the diff aswell. though i wouldn't be too worried about diff oil with stock viscous lsd (just make sure the diff oil is for LSD, as the non-lsd diff oils are different)

i use motul 8100 in my engine (i'd use chrono if it was in any higher state of tune) but i change it so regularly, i dont think its too much of an issue. i pay $50odd for a sump full of 8100. chrono is more like $120ish from memory.

i used redline oils in my diffs and gearbox and i will NEVER use anything else. that stuff is liquid gold.

d

redline lightweight shockproof in my box. can't remember specifically which fluids went into the diffs.

d

yeah lightweight shockproof in the box but use MT90 in the diff. I was having a chat with the guy at rare spares and i asked him why this would be and he was going on about the mt90 has an oil treatment additive in it so the diff doesnt clunk and make alot of noise, you can user lightweght shockpoof and you can by the redline oil conditioner to add in so it works better. so i just went the mt90 thats what redline recommend anyway.

I use

Engine: Motul 4100 Turbolight 10w40

Diff: Redline Lightweight Shockproof

Gearbox: Redline Lightweight Shockproof

yeah lightweight shockproof in the box but use MT90 in the diff. I was having a chat with the guy at rare spares and i asked him why this would be and he was going on about the mt90 has an oil treatment additive in it so the diff doesnt clunk and make alot of noise, you can user lightweght shockpoof and you can by the redline oil conditioner to add in so it works better. so i just went the mt90 thats what redline recommend anyway.

yea thats what i was told too and decided to go with the lightweight i havent had any clunking though.

ps the diff and gearbox are bitches to do if you are just using the bottles they come in :(

Gearbox redline light weight shock proof

diff redline mt90

gtr tranfers DONT USE REDLINE you most use the matic d nissan oil if you want it to last (this came from a head more knowledgable than myself who had rebuilt a shit load of transfers)

engine mobile 1 is good so is the redline products

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...