Jump to content
SAU Community

Recommended Posts

Guys,

I am changing the diff and gearbox oil shortly.

Is there a sort of oil that i should use for the diff and gearbox?

Gearbox: oil?

Diff: oil?

Engine: oil?

What my previous car (VL with SubZero build RB25DET), I used Mobil 1 for the engine. What oil do people recommend to use with a standard engine, not using any oil at all...

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/89831-enginegearboxdiff-oils/
Share on other sites

redline mt-90 for gearbox

then maybe motul or mobil1 for engine

(actually i use pennzoil 10w40 for engine oil. works fine for me... make sure your engine oil is quality and correct weight, but i wouldn't go spending $100 for an oil change with redline stuff. just make sure you change every 4000-5000kms)

probably redline for the diff aswell. though i wouldn't be too worried about diff oil with stock viscous lsd (just make sure the diff oil is for LSD, as the non-lsd diff oils are different)

i use motul 8100 in my engine (i'd use chrono if it was in any higher state of tune) but i change it so regularly, i dont think its too much of an issue. i pay $50odd for a sump full of 8100. chrono is more like $120ish from memory.

i used redline oils in my diffs and gearbox and i will NEVER use anything else. that stuff is liquid gold.

d

redline lightweight shockproof in my box. can't remember specifically which fluids went into the diffs.

d

yeah lightweight shockproof in the box but use MT90 in the diff. I was having a chat with the guy at rare spares and i asked him why this would be and he was going on about the mt90 has an oil treatment additive in it so the diff doesnt clunk and make alot of noise, you can user lightweght shockpoof and you can by the redline oil conditioner to add in so it works better. so i just went the mt90 thats what redline recommend anyway.

I use

Engine: Motul 4100 Turbolight 10w40

Diff: Redline Lightweight Shockproof

Gearbox: Redline Lightweight Shockproof

yeah lightweight shockproof in the box but use MT90 in the diff. I was having a chat with the guy at rare spares and i asked him why this would be and he was going on about the mt90 has an oil treatment additive in it so the diff doesnt clunk and make alot of noise, you can user lightweght shockpoof and you can by the redline oil conditioner to add in so it works better. so i just went the mt90 thats what redline recommend anyway.

yea thats what i was told too and decided to go with the lightweight i havent had any clunking though.

ps the diff and gearbox are bitches to do if you are just using the bottles they come in :(

Gearbox redline light weight shock proof

diff redline mt90

gtr tranfers DONT USE REDLINE you most use the matic d nissan oil if you want it to last (this came from a head more knowledgable than myself who had rebuilt a shit load of transfers)

engine mobile 1 is good so is the redline products

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
×
×
  • Create New...