Jump to content
SAU Community

Recommended Posts

Well, you can never be too safe can you...?

What the user from my above quoted text was saying makes sense though.

There is not much point in looking at peak vales. Put both basic knock and advanced knock in a chart and you will see they pretty much read very similar. There are some little discrepancies here and there, but gives you a better idea of the whole picture.

Below is an example. The red is basic knock and the yellow is advanced knock. I will make another one for you with a broader log.

log5.JPG

  • Replies 244
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Take the knock readings with a pinch of salt. Throw it on the dyno watch the exhaust and listen for ping. :)

Hi Cubes,

I know what pinging sounds like, but ive always wondered what to look for with the exhaust when knock occurs. I think it gives a puff of black smoke - if this is right, what would cause this? The air-fuel mix not completely burning under knock conditions?

Cheers,

Matt

Have they got your money gawdzilla?

Yes, they do... i sent money via paypal. Since they are a registered paypal vendor w/ good feedback, I figure it is safe. Plus, Glen and them aren't scammers or anything according to everyone I've spoken to. They are just slow to act, and customer service could use some work.

Whats funny is I got a confirmation email from Glen today saying it is shipping today. However, this is after I filed a complaint/refund request via Paypal (so that I could try and buy from some other vendor). Maybe that made him act faster *shrug*... but the item is on its way so I am satisfied for now. We'll see how it pans out. Sorry guys about the thread jack...

Edited by gawdzilla
Yes, they do... i sent money via paypal.  Since they are a registered paypal vendor w/ good feedback, I figure it is safe.  Plus, Glen and them aren't scammers or anything according to everyone I've spoken to.  They are just slow to act, and customer service could use some work.

Whats funny is I got a confirmation email from Glen today saying it is shipping today.  However, this is after I filed a complaint/refund request via Paypal (so that I could try and buy from some other vendor).  Maybe that made him act faster *shrug*... but the item is on its way so I am satisfied for now.  We'll see how it pans out.  Sorry guys about the thread jack...

I'll tell my friend to do that too, we split the cost and ordred one and he hasn't got a reply from them yet. I think he wants to get his money back and wait for the English Apexi PFC software.... tho I don't think it will work with my RB20 pfc.

I still havnt seen anything of the two sets of datalogit i ordered! :(

Could Jono please tell me where they are? I have lost my patience now. As i paid you a couple of months ago and i havnt seen anything of them yet, im wondering if i should take this one step further?? I have good contacts in Australia who can help me out but i hope it wont be neccessary. Its all up to you.

what the?

I paid the dude the money and he said he shipped them. How is this my fault? He said he contacted you directly and organised it with you.

I will send him and email, but I wouldn't be making threats, as thats not going to help you at all.

Sounds a fair deal. It's worth noting that there were no problems experienced by the rest of us in the buy, other than the (normal) lack of patience when some guys were getting theirs a couple of days ahead of others. No problem otherwise.

Hopefully the inquiry with shipping agent will get it sorted quickly.

cheers

one simple email, and I got this as a response -

"OK will do.

The package was insured, so will get onto our shipping agent and find out,

or claim it and re-send."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...