Jump to content
SAU Community

Recommended Posts

Head down to your local spare parts store........they should have some universal boots available........i got a set for a Laurel, the box mentioned R31 skyline.

Should cost you about 15-20 bucks for the pair.........don't forget to get a wheel alignment asap after fitting them.

i have these split as well, would it be the reason my HICAS light keeps on coming on? if it's something that only costs 15-20 bucks a pair i'm keen on fixing my car again,

it seems every day lately i've been fixing something small on that hoopdie

does your hicas light flicker? or does it stay on?

If it flickers, then your power steering fluid is low.

If it comes on everytime you drive your car and stays on, you may have a hicas lock bar fitted.

The split boots will not cause a leak, however left unchanged, split boots will allow dirt etc to get into the seals on your steering rack, and over time create leaks. For the sake of 20 bucks for the part and cost of a wheel alignment i suggest you do it.

I also suggest you check other parts such as rack ends, tie rod ends etc. If they are worn, replace them while you have it apart, otherwise you will be paying for several wheel alignments.

for those of you who are tight arses (like me) you dont need a wheel alignment, just count the number of turns when you take the rods ends off, and write it down so you dont forget!

on another note, when i bought the car the hicas light didnt come on, then after a while it started to come on occasionly, and after the last track day its been on ever since. Fluid is fine, no leaks. i think i'm due for a lock bar...

if it's leaking fluid then it's too late :) replacing the boot aint gonna do much now...the seals in there are gone...get them rebuilt...or do it yourself :) and then replace the boot

What do i have to rebuild? Is it the steering rack? I have no idea. Sorry for all the noob questions.

David

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...