Jump to content
SAU Community

Recommended Posts

Hey,

Today I finally got my GTR tuned with my GTSS turbo's and MINES dump pipe upgrade. MRC in Castle Hill who installed the turbo kit a few months ago did all the tuning work on it.

Just for information value current mods on car is..

GTSS turbo's

Mines dumps

HKS front pipes

Trust PEII cat back

Cam gears

Profec b boost controller

Power fc

Apexi pods

So still standard intercooler, injectors, pump, air flow meters etc.

As the graphs show it made 275kw's at 1.1 bar and pretty good 12:1 air fuel ratios. Boost is very steady after the initial slight spike. Car feels a whole lot better. Only downside is the air flow meters are maxed out, and to be expected the oil temp does creep up quicker and go higher. Nothing that a cooler wont fix. At this stage the fuelling and cooling will probably stay as they are as I dont have the money at the minute to upgrade, but all is very safe none the less. It did make a peak of 294kw's but he pulled some timing out just to be on the safe side.

Overall very happy with the performance and service of Mark at MRC.

NOTE* If anything is thinking of doing GTSS turbo's on their GTR DO IT!! They're awesome street turbo's. And to those with cams aswell even better!

post-2062-1128934124.jpg

post-2062-1128934159.jpg

Link to comment
https://www.sau.com.au/forums/topic/90604-dyno-tuned-with-gtss-turbos/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

awesome....so 300kws isnt out of the question with bigger, injectors and cooler and z32 afms ?

I think I spotted you on george st right in front of the cinemas on saturday night......

I know your plates but I didnt get see them so yeah unless it was another silver 32 with Work rims hehe

Nice, Is that rwkw or awkw?

Looks like you're hitting full boost/1bar boost around 4200-4300pm? williamsf1 said he was getting 1bar at 2900rpm!! Surely that can't all be cams?

I'm about to put a set of these on so trying to find out as much as possible. But i'll probably run mine at 1.3-1.4bar.

Whats your max injector duty on stock inj?

Nice, Is that rwkw or awkw?

Looks like you're hitting full boost/1bar boost around  4200-4300pm? williamsf1 said he was getting 1bar at 2900rpm!! Surely that can't all be cams?

I'm about to put a set of these on so trying to find out as much as possible. But i'll probably run mine at 1.3-1.4bar.

Whats your max injector duty on stock inj?

that's interesting about the boost. mine with stock turbos makes 1 bar at ~3700. it seems jonos is at ~4250. still not bad, but i would have expected under 4000.

that's interesting about the boost. mine with stock turbos makes 1 bar at ~3700. it seems jonos is at ~4250. still not bad, but i would have expected under 4000.

Yeah i'm interested to know how mine goes when i get them fitted. Give me a month or so and i'll be back.

Nice, Is that rwkw or awkw?

Looks like you're hitting full boost/1bar boost around  4200-4300pm? williamsf1 said he was getting 1bar at 2900rpm!! Surely that can't all be cams?

I'm about to put a set of these on so trying to find out as much as possible. But i'll probably run mine at 1.3-1.4bar.

Whats your max injector duty on stock inj?

Yep rwkw.

The stock injectors surely induce that 'lag' so to speak, the tuner said it could be slightly better but the stockers are pretty much close to their limit. Cams would be the other big contributor.

Don't know duty cycle of the injectors, if I get my hands on a pfc commander i'll see then.

Mine made 252rwkw's on the stock turbo's.

Yep rwkw.

The stock injectors surely induce that 'lag' so to speak, the tuner said it could be slightly better but the stockers are pretty much close to their limit. Cams would be the other big contributor.

Don't know duty cycle of the injectors, if I get my hands on a pfc commander i'll see then.

Mine made 252rwkw's on the stock turbo's.

Do you have a fuel pressure reg?

How do stock injectors induce the 'lag'? Would be good to know what duty cycle your hitting - you don't have a h/c?

252rwkw sounds pretty close to what i made on stock turbos. Do you have adjustable cam gears?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...