Jump to content
SAU Community

Recommended Posts

well.. hillclimbs are approx 1km - 1.5km in length and average 34-53 depending on car. only ones ive done is Highclere near burnie, domain in hobart, collinsvale in hobart and the basky one.

can find apps and schedules at www.nwcctas.net or www.cmitas.org.

browse youtube for vids on all :laugh: will link some vids tonight when i get home.

what one do you like best funz?

ive done legerwood lane and barigton ones as driver and passenger but i dont think i would go back to either for the expence of the travel and the value of driving time. but in saying that im hella keen to get my car to one

unfortunately they dont run the barington one any more due to a massively deteriorating road surface. its also got no grip at the best of times and at least one car gets totaled at every event

Minna Road was good too, its a quick one with good road surface and some exciting drops to steer away from!

Collinsvale is pretty fast... I pucked fourth in my old GTR there!

Domain is awesome if you have an Evo!

Dystart (and old one) used to be much like a flatter version of Minna Road.

Eagle Hawk Neck was the best and longest, maybe it will run again one day.

Update on my cars...

Evo III is all back together and heaps of fun to drive, although its still not yet been used in anger. Its for sale and is pretty much a fresh thing with plenty of cash throw at it in the near two years I've owned it. My dollar per kilomtre ownership ratio on this car is even worst than the GTR or the RX7... maybe the two combined! For anyone interested check it out - http://www.my105.com/12415

RX-7 hits the tilt-tray to go get the engine back in it today, fingers crossed I can get it ready to use at a circuit event next year. Pretty sure I have all the requireded parts now.

Already searching for the next toy in Japan, expect something very different from the previous!

http://www.youtube.com/funzr32

got 2 domain vids there, in process of uploading collinsvale, highclere and a few others. if you check my profile have a look at marinetowing, jam0076 in the gtr and snobes 350z. :-)

well.. front bar suffered a severe downsizing today at basky..not even jack could repair this lol

Oh well... At least you were out there having a crack.

Unlike that guy that turned up in his white GTR and then produced every excuse under the sun for not having a run... lol

Oh well... At least you were out there having a crack.

Unlike that guy that turned up in his white GTR and then produced every excuse under the sun for not having a run... lol

yeah, he was pretty slack aye! also that blaCK GTR complaining about 'oil' or something coming out of his car :-P excuses .

heres what the front bar looks like now.... lolz

photo-1.jpg

Well picked some more of my gauges up so thought I might throw them in and take a photo.

(plz note this is the first go at doing the cluster and yes it is clear perspex and Im planing on using it as a base for a better one)

1217091529-00.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...