Jump to content
SAU Community

Recommended Posts

Yeah, he's talking about the white Blitz R34 4 door, that & the HKS silvia are the D1 cars. They are easy to drift straight away, better after some personal tuning.

But in this game you can't "really" drift, once you hit opposite lock the car snaps back the other way & you lose it. It is a racing game, but everyone loves to drift. :D

Apart from that, take any decent rwd car onto Tsukuba wet, it's a good starting point & a good challenge to hold it, as it dosen't snap back on you. I have some good drift pictures I've taken, but nothing to transer them to my pc. :P

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1667159
Share on other sites

lol i can link some corners

don't turn too much on 1st corner keep the line in the centre if u go too wide you slide on the grass which can be good or bad or if you go too close to the apex you ll spin out.

lowering the gear and holding handbrake helps...I could even drift the 89 GTR lol shame i cant upload pictures but.

for suspension set-ups go to www.gamefaqs.com

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1667432
Share on other sites

drifting is possible you just have to have your set up right. cars that i have found the best are sileighty, 4 door blitz r34, and supra. having traction control and stability control on setting 1, sticky tyres, and using nos to loose rear traction are things that make the car better to drift. using the handbrake is difficult as it is hard to keep the revs up.

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1675546
Share on other sites

  • 3 months later...

GT3 is far beta for drifting, try the r32 gtst an the rx7 series 4 or 5 i think, they are the best cars to drift in, u can drift in GT4 i do all the time it just takes alot of practise an again use the rx7 or 32 even the s2000 i can get to drift. i'll put sum pics up if u can tell me how to gem em off my ps2.

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1976732
Share on other sites

ossie_21, it's not easy to drift in GT4 but it is possible.....

check out some of the GT4 videos posted here. Some of these guys are insane.

I can manage to link a few corners but not really more than 3 or 4 before I come unstuck. It doesn’t really matter what car you choose as long as it's a rear wheeler and the power and suspension is adjusted appropriately.

My preferred choice of weapon is usually the series 6 Bathurst RX7, Gallant VR-4 or my BMW M5. The Beemer is a big lard so it's easy to loose it around a corner as there is just a little to much weight to throw around.

HR32_GTS-T, you need a USB flash card to get the pics, simply plug it into the PS2 copy the photos (in the "home" section of GT4 mode, and then plug into PC and copy them over.... they are saved in JPEG format.

here is a shot of my Beemer...

post-13320-1140731057.jpg

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1976843
Share on other sites

here's a "little" video i came across (81megs), but it shows exactly how drifting can be done. This is by far the most impressive video i've seen. This was not done by me unfortunatly.... but it's really worth the download and if your like me... it will inspire you to try drifting in game again....

http://www.fbidrift.com/video/bloody-drifting-2.wmv

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1980879
Share on other sites

in gt3 you cant get full lock steering unless you are rolling at like walking pace so how do peopl drift effectively? in gt4 its probably the same otherwise you would have to have a feather touch on the joystick. unless youve got the driving force pro steering wheel :P

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-1981243
Share on other sites

  • 2 weeks later...

I found an odd and different car for hanging the tail. Its one of the alpine-renaults in the french section. Its the later model of the 2.

If you can get that thing to go straight you are doing really well.

It just doesnt have the power to back it up.

Give it a go anyway, its kinda funn.y

Link to comment
https://www.sau.com.au/forums/topic/92132-gt4-drift/#findComment-2001470
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...