Jump to content
SAU Community

Recommended Posts

I too have this question My S2 came with some nice Volk racing wheels and they say they have a +30 offset but they also have about a 30mm adapter which I believe is illegal if the offset is correct why is it that they need the spacer also the wheels have a totally different stud pattern to the car it seems like the spacers may be made for the wheels, could this make them Legal ?

Phill

The wheel sticker you have shown says the stud pattern is 5H 114.3 which is the same as the stagea, so they are they same stud pattern

At a guess is your car a manual?

18x8 +30 will fit fine if it is a "auto" as the rear track is wider by 50mm than a manual

If your car is a "manual" than it has the narrower track rear end, so the spacers will make the wheels sit out further so they fit (clear they rear shocks) and look better by filling the guards out

Any spacer is illegal

If you are worried about it, sell the rims and get a lower offset wheel.

The wheel sticker you have shown says the stud pattern is 5H 114.3 which is the same as the stagea, so they are they same stud pattern

At a guess is your car a manual?

18x8 +30 will fit fine if it is a "auto" as the rear track is wider by 50mm than a manual

If your car is a "manual" than it has the narrower track rear end, so the spacers will make the wheels sit out further so they fit (clear they rear shocks) and look better by filling the guards out

Any spacer is illegal

If you are worried about it, sell the rims and get a lower offset wheel.

Hi Thanks for that and yes it is a Manual, I tried to fit them without the spacers but the stud pattern was different ? they are closer together than the Cars hubs

Also who would buy them if they are Illegal ?

Phill

Hi Thanks for that and yes it is a Manual, I tried to fit them without the spacers but the stud pattern was different ? they are closer together than the Cars hubs

Also who would buy them if they are Illegal ?

Phill

That is strange the wheel stud pattern will not fit without the spacers

Are the wheels multi stud pattern, ie do they have 10 holes?

Sell the spacers seperatly to the wheels

Many people mod their cars and not worry about it being legal

Not sure who would do that thou :D

Early Volk Jap wheels had small (approx 5/100) bolt pattern + big positive offset and then spacers/adaptors to suit different vehicle bolt pattern's.

Seen a staggered set of subaru wheels like this and personally replaced a set on a supra.

ok, new wheels are FINALLY on.. yet to get it wheel aligned so still some tweaking to do

s14 cradle fitted in the rear with cusco adjustables all round, cusco arms up front too

standard metal guards lipped but not flared

work vs-kf

18x9.5+2 R disk (95mm dish) 235/40/18 silverstone

18x9.5+1 O disk (120mm dish) 235/40/18 federal

P4170070.jpg

P4170067.jpg

The wheel sticker you have shown says the stud pattern is 5H 114.3 which is the same as the stagea, so they are they same stud pattern

At a guess is your car a manual?

18x8 +30 will fit fine if it is a "auto" as the rear track is wider by 50mm than a manual

If your car is a "manual" than it has the narrower track rear end, so the spacers will make the wheels sit out further so they fit (clear they rear shocks) and look better by filling the guards out

Any spacer is illegal

If you are worried about it, sell the rims and get a lower offset wheel.

why is the track on manuals narrower?

does this mean 'shorter' drive-shafts?

what other shafts fit?

thanks

ok, new wheels are FINALLY on.. yet to get it wheel aligned so still some tweaking to do

s14 cradle fitted in the rear with cusco adjustables all round, cusco arms up front too

standard metal guards lipped but not flared

work vs-kf

18x9.5+2 R disk (95mm dish) 235/40/18 silverstone

18x9.5+1 O disk (120mm dish) 235/40/18 federal

P4170070.jpg

P4170067.jpg

just wondering why you put the 14 cradle in?

was it a straight bolt in?

any other things you had to change to do this?

thanks

why is the track on manuals narrower?

does this mean 'shorter' drive-shafts?

what other shafts fit?

thanks

just wondering why you put the 14 cradle in?

was it a straight bolt in?

any other things you had to change to do this?

thanks

A s14 craddle is the same width as the stagea manual cradle.

The main difference is the S14,S15 and R33 GTS (non turbo) cradles do not have Hicas, so it is the best ones to use when reusing as much as possible of the stagea auto rear end.

Generally you change it to get the narrower rear track so it matches the front end and you can fit better wider and lower offset wheels.

Drive shaft length is shorter. Stagea have 3 different styles plus 2 different tail shafts. So use either skyline or s14/15 that suits your cars diff bolt pattern

The reason the manual has the narrower track is nissan was saving money and reused the rear end out of r33 GTR's. The manual also has stronger drive shafts etc, hence nissan used these in manual stagea's

Mike can fill in what he had to do to make this work.

A s14 craddle is the same width as the stagea manual cradle.

The main difference is the S14,S15 and R33 GTS (non turbo) cradles do not have Hicas, so it is the best ones to use when reusing as much as possible of the stagea auto rear end.

Generally you change it to get the narrower rear track so it matches the front end and you can fit better wider and lower offset wheels.

Drive shaft length is shorter. Stagea have 3 different styles plus 2 different tail shafts. So use either skyline or s14/15 that suits your cars diff bolt pattern

The reason the manual has the narrower track is nissan was saving money and reused the rear end out of r33 GTR's. The manual also has stronger drive shafts etc, hence nissan used these in manual stagea's

Mike can fill in what he had to do to make this work.

nice thanks for that!

so stageas do not have hicas?

so manual stageas have the diff and driveshaft out of the 33 gtr, ie. big 6 bolt half/drive shafts?

doesnt the gtr diff have hicas also though?

"So use either skyline or s14/15 that suits your cars diff bolt pattern" : do you mean half shalf bolt pattern or tailshaft bolt pattern?

thanks!

=)

darrin pretty much answered everything

i went s14 cradle myself because my car does not have hicas, and i didn't want to fit a manual stagea cradle that has it (means i can run aftermarket adjustabletoe rods, which i am)

the part you have put in quotation marks, he is talking about half shaft bolt pattern. the gtr rear end is a 6x1 bolt from memory, s14/s14 is 3x2 bolt and r33 is 5x1 bolt (which i am using to match my 2 way diff in r33 housing)

the part you have put in quotation marks, he is talking about half shaft bolt pattern. the gtr rear end is a 6x1 bolt from memory, s14/s14 is 3x2 bolt and r33 is 5x1 bolt (which i am using to match my 2 way diff in r33 housing)

My auto stagea series 2 had 5x1.

The stagea manual one I have now is 6x1

Both had the same diameter drive shafts

There is 2 different tail shaft sizes as well. My car had a fairly heavy looking one and a I was also given a much lighter one, but thru it in the bin

ive read all 15 pages and nobody has tried or is running 17x9+35. my 18x9+20 bbs rims are a perfect fit. im just wondering if the extra 15mm further inwards would make the wheel scrub on anything?? shocks, inner guards etc.??

ive read all 15 pages and nobody has tried or is running 17x9+35. my 18x9+20 bbs rims are a perfect fit. im just wondering if the extra 15mm further inwards would make the wheel scrub on anything?? shocks, inner guards etc.??

that's 5mm less than an r33/34 gtr wheel. should be fine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...