Jump to content
SAU Community

Recommended Posts

Does anybody know where you can get touchup paint that will suit the Skyline colour codes (I think mine is AN02 - wine red)? or do i have to find somewhere that can make some up??

Unfortunately seeing as mine is so low, i've managed to scrape my front bar a couple of times badly. Some places its just unavoidable no matter how careful you are. Because there has been a few really steep ones, the paint that has been scraped off is actually visible from the front.

One day i'm gonna have to get the bottom part resprayed i think - anybody know how much that will cost while I'm here?

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/
Share on other sites

I wonder, if you give the colour code AN02 to any Nissan Dealers, shouldn't they be able to get you a touch up paint? It's gonna cost dear though but at least if they have, you'll get the exact match and might well worth paying for.

I bought one from Repco, from Toyota's wine red, and it didn't quite match 100%, a tad too dark.

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-140443
Share on other sites

I've heard around $600 for the whole front bar if u can get a good deal - not really worth it at this point. Its just visible down the bottom and some paint will mean at least u can't see the white bits unless u get up close.

I might try Nissan and see. If they match to another nissan colour sold here shouldn't be difficult. Don't care about the cost. Even it was $50, it's less than a total respray of the bar.

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-140610
Share on other sites

actually... looking at the old receipts here from andrew.. $195 for fitting and painting, but he got a lot of other stuff done at the same time so maybe a bit cheaper.

I know somebody who was charged $600 to get a pair of sideskirts done but i think he did get well ripped off.

Still, getting the bar sprayed is a longer term thing 'cause its not too bad right now. It would have to get worse before i considered that. I just want some paint so its not that obvious.

Maybe if i just go into a decent panel shop and ask them to mix me up a batch??

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-141778
Share on other sites

it sounds really dodgey but at Big W or K-Mart in the "Car Care" section there is touch up paint. All you have to do is look in this book and it gives you the code...then you go find it. I got my hands on some Gun Metal touch up paint for the R...cost me $10. Its in a spray can and has a little bursh aswell. Its a pretty good match aswell :)

Its called "Power Plus Spray and Brush" sumthin like that.

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-144199
Share on other sites

Hire a compressor, get some paint, and sand paper, a bit of primer, and do it yourself.. doesnt take much to respray something.. just take your time, and a bit of patience, and it will come out excellent!

I did my own side skirts, probly cost me less than $100 all upm and they look awesome

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-145734
Share on other sites

hmmm..yeah, i could and of course it can be done - i tried to respray my computer case and it kinda went a bit pear shaped.. I'll leave it to the pros for something i care about. I guess with anything you can sand back and try again if u stuff it up - the difficulty is in the matching.

I'm gonna try and track some down. I'll probably just do what BoOsTeD_RB26 said and find that bottle/brush stuff and see whether I can get the right match. I did it previously on an old car and it wasn't too bad however it was an aussie car and they had the exact match to the code.

I'm gonna spray my xbox chrome tomorrow too :D just cause

Do the skyline colours match colours for say Pulsars, Maximas or whatever other Nissans they sell down here?

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-145761
Share on other sites

Had a look over the weekend.. Went to Repco, and went to Kmart... both had the most shitty collection of that Holts stuff i could see. Repco was a bit better, but just had all the holden/falcon crap. I looked at their book of codes, and they didn't really have AN0 listed.. they had an AN2 or something which was listed as a red for 92 onwards but of course they didn't have it in stock.

To Nissan I shall go!

Link to comment
https://www.sau.com.au/forums/topic/9288-touch-up-paint/#findComment-147830
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...