Jump to content
SAU Community

13.4 second 1/4 for your 'stockish' R33. (A how to guide).


Recommended Posts

Shielding the pod is a great idea - the majority of air will be coming from the front of the car, the ambient heat from behind the filter basically acts as a contaminant to your nice cool air. The front of your car has a huge high pressure zone when you are moving, so long as you allow a path from there to the filter your car should not be starved in the slightest.

If the air is flowing from the front how is hot air from behind going to 'contaminate' the air flow into the POD?

I'm not saying you are wrong just wondering.

It could be that dyno results which 'prove' a shield is necessary, only do so 'cos the car is not moving (on the dyno) and so no 'cool' air is flowing from the front - w/out a shild the POD is just sucking in air from 360 deg around it which includes hot air around the engine. On the road it won't be like that of course with the 'cool' airflow from the front?

Edited by Battery_backup
so lithium how much rwkw u make at 6.7 psi???

The hell kind of question is that? I am pretty sure it made around 180rwkw on 7psi during a very early tune session, ran low 14s like that. I can't run any less than 12psi with the current setup - drag season is coming up, could have a friendly manual versus auto comparison :yes:

The hell kind of question is that? I am pretty sure it made around 180rwkw on 7psi during a very early tune session, ran low 14s like that. I can't run any less than 12psi with the current setup - drag season is coming up, could have a friendly manual versus auto comparison :yes:

Sorry i thought this was about standard times and ratings etc sorry if i got it wrong

The hell kind of question is that? I am pretty sure it made around 180rwkw on 7psi during a very early tune session, ran low 14s like that. I can't run any less than 12psi with the current setup - drag season is coming up, could have a friendly manual versus auto comparison :yes:

Ill do it! Perfect. Fun fun.

line up a v8 with a c4 transmission and same rw power and see what happens

I think you'll find that a typical V8 drag car automatic isn't setup quite the same as what the auto in your GTS25t is, hardly apples for apples. You Best tell the funny car and top fueller guys to get rid of their clutch setups and go torque convertor! Of course you CAN get your Jatco rebuilt to handle some decent power and stall/shift more aggressively so it actually does suit drag racing....

so ur setup only made 20 rwkw on my standard setup lol

I'm not sure what you are getting at or trying to achieve here, if you have something you need help with specify it please. It'll be good to see how you go with the auto - never said it won't go fast, it just could be a challenge unless you have or are going to get it modified to suit what you are doing.

Just for clarifications sake - you made 150rwkw on 7psi with stock turbo and I made 180rwkw on 7psi with stock turbo, and you somehow come with a comment lolling I only made 20rwkw more than your stock turbo? Given I made 30kw @ wheels more than you on the same boost with the same turbo, I am actually struggling to work out what you are going on about.

Edited by Lithium

Ahh right sorry, when I said "I can't run under 12psi with the current setup" I meant with the GT3076R vs the stock turbo - I couldn't run 7psi if I wanted to with the bigger turbo.

Edited by Lithium
how bout 13.061 on stock turbo...stock ecu....only exhuast/fmic/boost......on street tyres as well....2.00 60ft...

Not un-realistic if you get a good run and launch.

It may be a high goal, but im aiming to get as close as possible to a 12.999999 with stock ECU and bolt ons and street tires.

When im convinced i cant do any better only then will i try on some semi slicks.

If you can nearly do it, then so can i :D

yeah....super close to my goal....cant help but be a little disappointed it didnt crack the 12.....but theres no way i could launch any better absolutely no tyre slippage, it just stuck....tyres couldnt hold any of 2nd....chirped 3rds....and the rest is pretty straight forward....

best time on my other r33 was a 13.08 on some pretty used drag slicks....launch was a bit better...1.911 60ft with wheel spin....slipped part of 2nd....chirped third.....trap speed was 4km/h off ^^

but a 12 is possible....bloody difficult....the rest of the runs on that night were around 13.3-13.5....poor launching by comparison...

Interesting..

Only thing i will suffer from is horribly poorly prepped drag strips :D

Not quite the money around down here in NZ involved in the strips. But hey, just a handicap eh? :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...