Jump to content
SAU Community

Recommended Posts

Hey all.

Just thought I'd post a few pics of a little project I made last week. Its a turbine (Jet) engine and it actually works. I have used a T46 Garret turbo (Off a 500hp cummins truck engine). At the moment I have it running on bbq gas but hope in the near future to convert it to run on either diesel or kero. The best I have had it running so far is about 14psi boost and at that it is making a HOLE LOT of noise. Hope to try and squeeze at least 20 to maybe even 25 psi out of it and then strap it to a go cart. :).

post-17556-1130762115.jpg

post-17556-1130762178.jpg

post-17556-1130762382.jpg

post-17556-1130918472.jpg

Edited by GTROB
Link to comment
https://www.sau.com.au/forums/topic/93116-home-made-jet-turbine/
Share on other sites

Hey all.

Just thought I'd post a few pics of a little project I made last week. Its a turbine (Jet) engine and it actually works. I have used a T46 Garret turbo (Off a 500hp cummins truck engine). At the moment I have it running on bbq gas but hope in the near future to convert it to run on either diesel or kero. The best I have had it running so far is about 14psi boost and at that it is making a HOLE LOT of noise. Hope to try and squeeze at least 20 to maybe even 25 psi out of it and then strap it to a go cart.  :).

That is brilliant mate! I must come over and check it out!

You know that used to use centrifugal turbos/turbines for jet engines back in the old days, then they went to axial flow turbines like they use now.

Check this out:

http://www.nybro.com.au/downloads.php

I work for GE, maybe I could grab one of our 200MW turbines and strap it to something. :D

Hey all.

Got the web page up and running. It's not completely finished so sorry if not every thing works. There is a small video on there so you can see and hear what it sounds like.

Web site is http://fulbosjet.com/.

Cheers and enjoy.

Edited by GTROB
  • 4 weeks later...

For those who are interested I may be in Adelaide next week end with the jet engine. (Got some mates that want to see it in actions). So if any one wants to come and check it out feel free. Will keep you posted on where and when.

Sweeeet :)

I've seen this done on many websites and wanted to try it myself :D Its a damn shame i have no engineering skills whatsoever!

Anyway, i read somewhere that this setup could spin itself to destruction... How are you limiting the turbo spin? Is there an automatic cut off if the turbo spins to a certain range?

For those who are interested I may be in Adelaide next week end with the jet engine. (Got some mates that want to see it in actions). So if any one wants to come and check it out feel free. Will keep you posted on where and when.

I'm interested.. :)

Not likely to go bang. Well at least I hope not. The outer casting of compressor and turbine housing are big enough to contain ever thing if it does go bang. As it is a truck turbo they don't use a roller bearing set up. It's just a shaft running through a brass bush, so that would sieze before it blew up. I just control it by the tap on the gas bottle. As soon as you turn the bottle off the flame stops and the trubo spool's down. I'm not going to run it any higher than about 25psi boost any way, That will keep it in the working range of the turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...