Jump to content
SAU Community

Recommended Posts

no luck with the prechopped onions ey erin

We found some, but for $2 for 200g, it was a bit of a rip.. if we did that, there wouldn't be much money left over for the kiddies..

So I chopped 5 kilos of onions this afternoon.

  • Replies 277
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'll be there, watch for the R34 Grey Sedan. Will be our first picnic with our 7week old son. :)

ok...for the Sunny coast people.. meet u all up at BP caboolture.

look out for the blue " new in town gtst ".

Well everyone, lets look at this from a different point of view if it rains. At least for ONCE the bloody water will go directly in to the catchment area. Anyway, Im primed! Sleep time now, cyas at Aspley!

no but id imagine she cried a river

and then some

12 hrs and counting.

off to bed i go

cya's all in the morning!!!!

OMG i wish i could remeber the last time i was in bed at 10 on a saturday night

Well everyone, lets look at this from a different point of view if it rains.  At least for ONCE the bloody water will go directly in to the catchment area.  Anyway, Im primed!  Sleep time now, cyas at Aspley!

don't worry about it raining tomorrow, it won't rain at the dam or in the catchment for that matter, that's where we need it to rain to fill the dam, sif that would happen.

Farken

avoided some nasty nasty nasty storms on the way back.

farken omg some bad bad stuff.

on the m1 near narangba, damn it was like a mini tornado came though.

big 1m wide trees snapped in half etc.

hope everyone was lucky enough to avoid hail like me.

good fun day, nice to meet some more peeps

mick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...