Jump to content
SAU Community

Recommended Posts

Hey guys,

Just looking for some advice on what to start with for modifications. I have a stock r32 GTR and i am looking to purchase apexi airfilters, trust intercooler, full exhaust system and BOV's. Would these mods be a good start? Any opinions appreciated! Thanks

Link to comment
https://www.sau.com.au/forums/topic/94730-modificaton-order/
Share on other sites

firstly,

cat back exhaust (or if you have the dough go for dumps, fronts, cat and the rest)

either a K+N in the stock air box, or the apexi pods if you must

then you'll want a boost controller of some kind

Power FC is next and couple that with a set of cam gears

forget the trust FMIC on an otherwise stock GTR it's a waste of time and money. there is nothing wrong with the stock GTR cooler under 300rwkw. no real need for the bovs either as the GTR alread has nice twin bovs from the factory but if you are keen just make sure you get a GTR specific kit. I quite like the trust type R kit, or the blitz super sequential is nice too. i can't stand the HKS ones though.

firstly,

cat back exhaust (or if you have the dough go for dumps, fronts, cat and the rest)

either a K+N in the stock air box, or the apexi pods if you must

then you'll want a boost controller of some kind

Power FC is next and couple that with a set of cam gears

forget the trust FMIC on an otherwise stock GTR it's a waste of time and money. there is nothing wrong with the stock GTR cooler under 300rwkw. no real need for the bovs either as the GTR alread has nice twin bovs from the factory but if you are keen just make sure you get a GTR specific kit. I quite like the trust type R kit, or the blitz super sequential is nice too. i can't stand the HKS ones though.

Yeah i was thinking of getting the trust Type R BOV's. Okay so i think i will get my Trust power extreme 2 cat back exhaust first with a high flow cat and a trust front pipe until i get paid <_< . My front mount seems a little dirty, im not sure if its still efficient.. how much does it cost to get it flushed and cleaned?

don't waste your money on aftermarket BOV's, your standard ones work a treat.

Pod filters, you don't have to, the mines car is still using the standard airbox with a panel filter upgrade. GT-R cooler is good for 300 odd kw, as mentioned above, the just jap race car still uses the stocker.

Go for an exhaust, aftermarket ECU, an EBC and some cam gears to start off with and then go from there. Next thing after that will probably be a fuel pump, clutch, maybe injectors, cams, more boost? upgraded turbos?

Anyone?

don't waste your money on aftermarket BOV's, your standard ones work a treat.

Pod filters, you don't have to, the mines car is still using the standard airbox with a panel filter upgrade. GT-R cooler is good for 300 odd kw, as mentioned above, the just jap race car still uses the stocker.

Go for an exhaust, aftermarket ECU, an EBC and some cam gears to start off with and then go from there. Next thing after that will probably be a fuel pump, clutch, maybe injectors, cams, more boost? upgraded turbos?

Anyone?

ok thanks for that! what sort of boost is it safe to run with the stock cooler? would something like a greddy emanage piggy back computer be good enough or should I go a full replacement computer? Im only looking to mildy mod my car. like 240kw or so?

the stock bnr32 intercooler should be for around 300rwkw

however the exhaust wheels on the 16 year old turbochargers wont be.

they will let go near 1.0 bar and then youll have to fork out for a new turbo (or a pair) and thats if it doesnt do any damage when it fails, which it has known to do on the rb26. more boost means more heat simple

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah so when you turn key to IGN the fuel pump should run for a few seconds. If you find the fuel pump relay (and have a multimeter, and a second person) to can check the relay inputs.  One trigger pin should be either fully earthed  The other trigger pin should get 12v from the ECU for say 3 seconds when you turn key to IGN, and at all times that key is at START (note, I said this from memory, it may be the other way around, ie one pin always has IGN 12v and the earth has continuity to earth when you turn the key) One Pin should have a good battery voltage The last pin goes to the fuel pump + Also note that if the power to the relay is good, and the relay is working, it is worth checking the pump has a good earth too. There is a computer in the standard system that increases the earth resistance to slow down the pump when not required, pretty old school and it may have failed
    • All this talk about fuel and fancy ECUs, meanwhile my poor old R32 has neither.... When the ignition is turned on, should there be power running o the fuel pump constantly or just for the few seconds it usually takes to prime the pump? About to go have another look at it, have watched some YouTube vids on how to use a  multimeter and looked at some wiring diagrams but really have NFI what I'm looking for because electricity is invisible  
    • Yuh....but weren't all the supertourers, except maybe the Audis, FWD? I don't recall any of the others being AWD.
    • They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox) They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox)
    • Inspiration: https://www.nissan-global.com/EN/HERITAGE_COLLECTION/Primera_GT.html    
×
×
  • Create New...