Jump to content
SAU Community

Recommended Posts

Hi All

what is the best way to install the Power Fc computer?

I want to put power FC computer in my gtr34 2001what is the best why to put it can I put it alone with out the original car computer or like the Z350 I have to but it with the car computer .

Thanks

Shwaier

the powerfc is full stand alone and not a chip replacement. you simply remove your old computer and replace with powerfc, no need to swap chip sockets or anything

Ya I know its a stand alone computer put I her from my friend have a Z350 when you want to install the Power Fc on it you can put it alone put the best way if you put it to the engine and the electronic things on the original computer .

And I think there are different between the R33 and R34 because the R33 you remove the original and put the Power Fc alone .

Thanks paulr33

Shwaier

sorry i dont understand exactly? The apexi powefc is complete stand alone. you no longer need to retain the stock ecu in the car, the powerfc runs all the factory sensors and systems correctly. there would be no need to keep the stock ecu installed or piggybacked. apexi do not make the powerfc for the 350z so he/she may have an ap engineer unit (didnt know they existed for 350z) or some other form of piggyback, prehaps apexi safc?

the bnr34 skyline has built in security in the cars key to prevent theft.

i believe this works fine as its not linked to the ecu itself.

i know of at least one bnr34 skyline that has no issues, again assuming he is using the standard key still. perhaps just try it and see how it goes? let us know and ill to powerfc faq

I have a series II bnr34 and i have a power f/c , just pull the stock ecu out and install the power f/c .

No problem with the immobiliser , it has its own computer that enables the cars main ecu .

I dont want to tell you on here how it works but if you want to know pm and i'll tell you .

i think, he thinks we dont realise that bnr34 and bnr33 powerfc is different and i think he thinks we don't know about the security feature built into the key. thats the only logic i can obtain from it? but yes they are different ecu's as you would expect. sounds he was just worried about his key still working which is fair enough, i would be too

dudes

i Bought the car from used showroom in japan and after i Bought

it i realise that the car computer is a R33 computer and the key is not

the orignal key (withe out security chip) its a normal key now i want to change the computer to Power Fc and i dont know what kind i have to order the one for R33 or for R34 Because my frind Says Maybe when you order thr Power Fc for R34 the security system will work again and i dont have the key withe the chip.

Thanks

Shwaier

Just in case anyone wasn't aware - the "FC" in "Power FC" stands for "Full Computer". It's meant to replace the ECU along with all its functions, in addition to everything else it does. I imagine that's the reason why you can't use the R33 Power FC in an R34, if the R34 has additional security features.

  JimX says

I imagine that's the reason why you can't use the R33 Power FC in an R34, if the R34 has additional security features.

but the Security Features have a diffrint computer not the same ECU

ok what the different between the 2 engines its all the same Rb26 Deet

the different in the computer and the electronic thing only.

if they baypass the security i think i can but a Power Fc for R34 and i will not need the Security key because i used a regular key now (with out chip) but let say if i need to use a security key from where can i get one and where can i program it .

Thans

Shwaier

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...