Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

Hey ppls.

I'm extremly sorry about delay with group buy.

I've had a lot of life changes in the mean time but I digress.

The R33 Series I, Stag Series I, R34 GTT (all) guides are all being cut at the moment.

I have the cardboard boxes for freight in the factory and I will begin making them up shortly.

The R33 Series II guides are STILL not finalised but I'm doing some grinding on it today and I need somebody who can come ot Dandenong to trial fit it. I'd come to you, but I need to use a grinder to make any mods and the factory here has all that stuff.

The Stag Series II guide sample will be send out to two guys in Canberra to fit to their car and try it out. I think it should be pretty good, but it may need some slight re-modelling.

Again, I'm super sorry about the delay, but understand that I will supply each and every one of the guides as soon as I can.

I thought I'd be able to finish them a lot faster than I have. I've had a lot of stuff go on in the last few months. It's been crazy.

Yours in total apology

BASS

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

Hey,

I'll DEFINATELY take one for an R34 GTT with a Nismo front bar!

Let me know as soon as you need money for it + freight and ill transfer!!!

PM / Email / Phone me if you need to!

Thanks.

Hey ppls,

Just got the phone call and went and picked up the blanks.

So, I have all the Series II Stags, the Series I R33, all the R34 guides in the back of my car.

I'll be testing a revised R33 Series II guide on a car on the weekend and a Series II Stag also.

The end of this group buy is nigh. Finally. :S

Cheers

BASS OUT

post-6399-1158282467.jpg

R33 Series II guide modified.

It's been ground and the bend changed and will be trial fitted again to Dezz's car on the weekend.

Hopefully she'll be all good this time.

Cross your fingers.

These are still available Bass? I'd like one for my R34 GTT... think it's a standard nismo front bar. Could you pm me the details? Cheers.

  • 2 weeks later...

Bass Junky or Dezz, any updates on how the fitment went?

I know there have been problems but one more month and this has been going on for a year, and payment was in Feb! That was 8 months ago! It's getting ridiculous.

Hi Guys.

Again, I sorry about the delay. I have not stopped on this bloody project.

I took the guides to a plave near here last week and went back a few days later and they then told me they couldn't do it because they are too busy and blah blah blah.

So shortly I'm going out to find antother person.

I'm also playing with Dezz's car tomorrow.

Stay tuned.

TOP NEWS PEOPLES

I have finally trail fitted the R33 GTS-T Series II guide to Dezz's car and lo and behold, it's spot on!

A very minor adjustment to an angle and she's apples!

I'll be sorting out hte order to the laser cutters on the next day or two and then away we go.

THANK YOU EVER SOO MUCH FOR YOUR PATIENCE.

Bass Out

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...