Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

Hey ppls.

I'm extremly sorry about delay with group buy.

I've had a lot of life changes in the mean time but I digress.

The R33 Series I, Stag Series I, R34 GTT (all) guides are all being cut at the moment.

I have the cardboard boxes for freight in the factory and I will begin making them up shortly.

The R33 Series II guides are STILL not finalised but I'm doing some grinding on it today and I need somebody who can come ot Dandenong to trial fit it. I'd come to you, but I need to use a grinder to make any mods and the factory here has all that stuff.

The Stag Series II guide sample will be send out to two guys in Canberra to fit to their car and try it out. I think it should be pretty good, but it may need some slight re-modelling.

Again, I'm super sorry about the delay, but understand that I will supply each and every one of the guides as soon as I can.

I thought I'd be able to finish them a lot faster than I have. I've had a lot of stuff go on in the last few months. It's been crazy.

Yours in total apology

BASS

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

Hey,

I'll DEFINATELY take one for an R34 GTT with a Nismo front bar!

Let me know as soon as you need money for it + freight and ill transfer!!!

PM / Email / Phone me if you need to!

Thanks.

Hey ppls,

Just got the phone call and went and picked up the blanks.

So, I have all the Series II Stags, the Series I R33, all the R34 guides in the back of my car.

I'll be testing a revised R33 Series II guide on a car on the weekend and a Series II Stag also.

The end of this group buy is nigh. Finally. :S

Cheers

BASS OUT

post-6399-1158282467.jpg

R33 Series II guide modified.

It's been ground and the bend changed and will be trial fitted again to Dezz's car on the weekend.

Hopefully she'll be all good this time.

Cross your fingers.

These are still available Bass? I'd like one for my R34 GTT... think it's a standard nismo front bar. Could you pm me the details? Cheers.

  • 2 weeks later...

Bass Junky or Dezz, any updates on how the fitment went?

I know there have been problems but one more month and this has been going on for a year, and payment was in Feb! That was 8 months ago! It's getting ridiculous.

Hi Guys.

Again, I sorry about the delay. I have not stopped on this bloody project.

I took the guides to a plave near here last week and went back a few days later and they then told me they couldn't do it because they are too busy and blah blah blah.

So shortly I'm going out to find antother person.

I'm also playing with Dezz's car tomorrow.

Stay tuned.

TOP NEWS PEOPLES

I have finally trail fitted the R33 GTS-T Series II guide to Dezz's car and lo and behold, it's spot on!

A very minor adjustment to an angle and she's apples!

I'll be sorting out hte order to the laser cutters on the next day or two and then away we go.

THANK YOU EVER SOO MUCH FOR YOUR PATIENCE.

Bass Out

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...