Jump to content
SAU Community

Gb: R33 Gts-t And Gtr And R34 Gtt Radiator Guides


Recommended Posts

Hey ppls.

I'm extremly sorry about delay with group buy.

I've had a lot of life changes in the mean time but I digress.

The R33 Series I, Stag Series I, R34 GTT (all) guides are all being cut at the moment.

I have the cardboard boxes for freight in the factory and I will begin making them up shortly.

The R33 Series II guides are STILL not finalised but I'm doing some grinding on it today and I need somebody who can come ot Dandenong to trial fit it. I'd come to you, but I need to use a grinder to make any mods and the factory here has all that stuff.

The Stag Series II guide sample will be send out to two guys in Canberra to fit to their car and try it out. I think it should be pretty good, but it may need some slight re-modelling.

Again, I'm super sorry about the delay, but understand that I will supply each and every one of the guides as soon as I can.

I thought I'd be able to finish them a lot faster than I have. I've had a lot of stuff go on in the last few months. It's been crazy.

Yours in total apology

BASS

  • Replies 520
  • Created
  • Last Reply

Top Posters In This Topic

Hey,

I'll DEFINATELY take one for an R34 GTT with a Nismo front bar!

Let me know as soon as you need money for it + freight and ill transfer!!!

PM / Email / Phone me if you need to!

Thanks.

Hey ppls,

Just got the phone call and went and picked up the blanks.

So, I have all the Series II Stags, the Series I R33, all the R34 guides in the back of my car.

I'll be testing a revised R33 Series II guide on a car on the weekend and a Series II Stag also.

The end of this group buy is nigh. Finally. :S

Cheers

BASS OUT

post-6399-1158282467.jpg

R33 Series II guide modified.

It's been ground and the bend changed and will be trial fitted again to Dezz's car on the weekend.

Hopefully she'll be all good this time.

Cross your fingers.

These are still available Bass? I'd like one for my R34 GTT... think it's a standard nismo front bar. Could you pm me the details? Cheers.

  • 2 weeks later...

Bass Junky or Dezz, any updates on how the fitment went?

I know there have been problems but one more month and this has been going on for a year, and payment was in Feb! That was 8 months ago! It's getting ridiculous.

Hi Guys.

Again, I sorry about the delay. I have not stopped on this bloody project.

I took the guides to a plave near here last week and went back a few days later and they then told me they couldn't do it because they are too busy and blah blah blah.

So shortly I'm going out to find antother person.

I'm also playing with Dezz's car tomorrow.

Stay tuned.

TOP NEWS PEOPLES

I have finally trail fitted the R33 GTS-T Series II guide to Dezz's car and lo and behold, it's spot on!

A very minor adjustment to an angle and she's apples!

I'll be sorting out hte order to the laser cutters on the next day or two and then away we go.

THANK YOU EVER SOO MUCH FOR YOUR PATIENCE.

Bass Out

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...