Jump to content
SAU Community

Recommended Posts

Boof Heads.

How about you all jump in and race in a class, any class, JUST PICK ONE and support this sport by filling fields and racing instead of whinging that the Sport Compact classes are to difficult to race in for your particular ride.

There's a class for just about everyone that falls even vaguely under the S.Compact banner. Get over your petty grievances until you can actually say that you are supporting the future of this sport.

Adrian

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Dude you're a goose, there are a few ways to look at that ruling. One is that the cars are meant to be "street" cars, and should be running stock gearboxes. Another is by restricting the transmissions allowed will encourage cheaper parts.

The reality is that the only OEM parts used by the majority of the qualifying field is the outside case. So a $10,000 PPG box is "worse" than a $4,000 Powerglide? From a breakage point of view too the Powerglide will be cheaper to run and maintain than a dog box. How is that a realistic rule?

They way I look at is from a performance perspective, not a cost one. I don't think you can write rules that stop people spending money, they will spend whatever they can afford.

The rule writers are obviously of the opinion that the ability to change to a non OEM gearbox is a performance increaser, that's why they handed out a handicap for doing it. My view is that an high stall speed drag auto is worth more than 150lbs in performance, I chose 200lbs based on the weight/performance index.

I am simply saying that 150 lbs is not enough and that 200 lbs is a more accurate reflection, I don't think you should be attacking me on the basis that they don't need a handicap at all. That is already decided and agreed and included in the current regs. If you want to argue cost (which I think is a valid argument by the way) then you need to do just that.

I should emphasise that I am not asking to run a LIGHTWEIGHT R32GTST, all I am asking is to run a STANDARD WEIGHT R32GTST . So I don't think is is either fair or accurate to tell someone with a standard R32GTST to go and race in another class. Because that's what the current regs say.

:P cheers :)

Edited by Sydneykid
I should emphasise that I am not asking to run a LIGHTWEIGHT R32GTST, all I am asking is to run a STANDARD WEIGHT R32GTST .  So I don't think is is either fair or accurate to tell someone with a standard R32GTST to go and race in another class.  Because that's what the current regs say.

:P cheers :)

Sorry Gary but you say your R32 weighs 1180 kgs with roll cage +driver weight but the stock specs for a standard R32 seem to be 1320kg with no cage +driverhttp://imports.motortraders.net/imports/spec.asp?id=668 but you've only made minimal weight reductions and added weight by adding a cage hahaha

So really a STANDARD WEIGHT R32GTST will have no problems at all racing in SRWD class

Sorry Gary but you say your R32 weighs 1180 kgs with roll cage +driver weight but the stock specs for a standard R32 seem to be 1320kg with no cage +driverhttp://imports.motortraders.net/imports/spec.asp?id=668 but you've only made minimal weight reductions and added weight by adding a cage hahaha

So really a STANDARD WEIGHT R32GTST will have no problems at all racing in SRWD class

I have no idea where they get 1320kgs from, but it isn't correct.

I have the Japan exit weight for mine and it was 1265 kgs, that's a standard 1990 model R32GTST M Spec 2 door with aircon. It had no ABS or sunroof and a little fuel in the tank (not much).

This is an extract by funkymonkey on R32 specs

http://www.skylinesaustralia.com/forums/in...9&hl=definitive

As you can see it quotes 1260 kgs, so mine is no super lightweight. Add an 85 kg driver and you are at 1345 kgs, that means 64 kgs of lead to be added to a stock standard R32GTST.

:) cheers :unsure:

Boof Heads.

How about you all jump in and race in a class, any class, JUST PICK ONE and support this sport by filling fields and racing instead of whinging that the Sport Compact classes are to difficult to race in for your particular ride.

There's a class for just about everyone that falls even vaguely under the S.Compact banner.  Get over your petty grievances until you can actually say that you are supporting the future of this sport.

Adrian

WORD

sport rwd had 98 entires at qld jambo about triple that of sport mod.

exactly the top guys in sport rwd should be advancing into sport mod.

especially when most of those cars fit sports mod rules a whole lot better then sport-rwd....

mick

they have to run slicks to be in sport mod, you cant run street tyres in sport mod.

i dont think the top cars want to run against kier wilson or the 7 sec rx3 from PAC.

exactly the top guys in sport rwd should be advancing into sport mod.

especially when most of those cars fit sports mod rules a whole lot better then sport-rwd....

mick

they have to run slicks to be in sport mod, you cant run street tyres in sport mod.

i dont think the top cars want to run against kier wilson or the 7 sec rx3 from PAC.

Its DYO so i don't know where the fear comes into it...i think the word thrill comes to mind more than fear.....Anyway....who is Kier Wilson ?

yeah isnt it a stock rb26 doing 8s?

lol

that'll show those 'stock' 2js

ahh yes....i do remember reading about that car in a mag.....an engineering marvel

why?

what motors would you like to include?

remembering we are sports compact. its not about big engine displacement?

mick

VQ45 Nissan engine is what he wants included.

Does anybody have a rule change suggestion that doesn't directly influence their race car??

Ahh yes there is one person....see second post.

VQ45 isn't eligible right now - due to the maximum 4.1L displacement rule. Any thoughts on the maximum discplacement rule?

V8's are not currently eligible to run in Sport Compact either. I am open to arguments for and against though. I am yet to be convinced one way or the other as to whether hi-tech, late model injected OHC bent eights should be allowed to run or not.

Adrian

VQ45 isn't eligible right now - due to the maximum 4.1L displacement rule.  Any thoughts on the maximum discplacement rule?

I think it should be the same as the NHRA Sport Compact at 3.5 litres maximum limit.

it will always be dyo,

dyo is harder racing than head up any way, you have to think about it way more.

DYO is all about preventing racing becoming too expensive for most to compete.

DYO can have it's own moments of excitement, but there's something intrinsically wrong with sandbagging, buttoning off and braking during a drag race.

I think it's a good concept but it can have awkward moments, especially during the infancy of Sport Compact where field sizes are so low. You can get really embarassing ETs for class winners which does not provide excitement for the spectators.

In my experience 99% of spectators do not understand DYO or the handicap starts. If they were better educated they might understand some of the excitement as the quicker car tries to hunt down his competitor and all the drama about should I or shouldn't I at the top end.

Even fewer understand index classes, but then there are none in Sport Compact at the moment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...