Jump to content
SAU Community

Recommended Posts

Why not grab a 3inch single stainless dump pipe off ebay? I got one off JustJap for around $200 delivered. Top quality, fitted to my Stagea (R33-based) without too much worry.

Or spend the extra $100 and get the long length split dump from Batmbl, in mild steel.

I would think a 2.5inch might be restrictive when you (eventually) go chasing higher kw gains........

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1740608
Share on other sites

to be beneficial they need to split for approx 30cms. that being said batmbl (under business trader section) sells a split dump 3" and front pipe in one unit for around $300 ish i think and its a all in one piece that should do wonders if you have stock dump and front pipe setup

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1740625
Share on other sites

Hey guys, i just got back from my local exhaust shop and im having the same issue, wether to get a 1 piece 3" dump or split dump which begins as 2 1/2" then to 3"?? would there be any power gain advantages with the split? cause i heard they reduce tubulance when the waste-gate opens up.. what you guys reckon?? Here are some pics to give you an idea..

post-23753-1132810245.jpg

1 Piece Dump

post-23753-1132810352.jpg

Split Dump

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1741358
Share on other sites

I'm using the CES split dump/front pipe (great quality btw)...

while i haven't compared the difference between the split and a standard 1 piece pipe, i can tell you that the difference between a split and stock pipes was HUGE. Boost comes on earlier and stronger.

Can also notice a difference when comparing against a couple of others with same mods but just 1 piece dump/front pipe (although this is just by my seat-of-my-pants guage)

like arkon, i believe the theory to be quite sound and that's what initially drew me to the split dump/front...

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1742702
Share on other sites

to be beneficial they need to split for approx 30cms. that being said batmbl (under business trader section) sells a split dump 3" and front pipe in one unit for around $300 ish i think and its a all in one piece that should do wonders if you have stock dump and front pipe setup

i disagree... i have a genuine HKS split dump (which is not split for 30cm) and a 3" blitz front pipe and the difference the made was huge...

at the end of the day though, the standard dump pipe is a p.o.s... and any of the aftermarket dump / front pipes will benefit your car...

oh yeah if you are changing the dump / front pipe a high flow cat is a must imho...

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1743573
Share on other sites

I got my split dump put in just a few days ago, car seems to have a much deeper/meaner sounding grunt, however does feel alot more sluggish when coming onto boost, almost regretting getting it put in atm, im just hoping ill see a bit of a benefit in the higher rev ranges - havnt actually experimented too much with this due to the hot weather.

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1744345
Share on other sites

i remember there was a guy at the ice dyno day a few weeks ago,

he just had the normal mods intercooler/exhust..

he nearly made the same as the cars with the pfcs :P

I thought they wouldnt be so good, but after speaking to him and seeing his result i wana get me one 2

Link to comment
https://www.sau.com.au/forums/topic/96104-split-dump-pipe/#findComment-1744660
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...