Jump to content
SAU Community

Recommended Posts

u looking at buying?

if so rego is same for all cars which is about $540 if i can remember correctly, RWC is roughly $60 depending on where u go and theres a transfer fee for the car which depends of the value of car. Not too certain but for a 89GTST it woulld be around $300?

As for RWC i dont think they will pass the aftermarket BOV

Hey dude,

Mate here is a link to Vic roads.. http://www.vicroads.vic.gov.au/vrpdf/randl...Duty%202005.pdf

that there has all the details on the charges of the transfer fee's.. al dependant on how much you pay for the car...

good luck hope all goes well and you get the car and are on the road with very few hassles...

Matt

u looking at buying?

if so rego is same for all cars which is about $540 if i can remember correctly, RWC is roughly $60 depending on where u go and theres a transfer fee for the car which depends of the value of car. Not too certain but for a 89GTST it woulld be around $300?

As for RWC i dont think they will pass the aftermarket  BOV

rego is around $540 +%10 of what your car costed, or somthing ghey like that :) . but its a once off thing at vic-stealoryourmoney-roads

BOV will pass both if its plumbed back.

BOVs are only illegal if theyre venting to atmo.

Im glad when i go to reo my 32 i only have to pay like 800 all up for Rego inc duty haha yay for getting it cheap.

nope they dont use vicroads cause its got nothing to do with them.

i put my last 32 down for 7k :O paid stuff all duty... insured full comp for 15k agreed value.

this one i bought for 4k so i will put 5500 down for its value lol

nope they dont use vicroads cause its got nothing to do with them.

i put my last 32 down for 7k :) paid stuff all duty... insured full comp for 15k agreed value.

this one i bought for 4k so i will put 5500 down for its value lol

guess that rules that out then

lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers fellas, I got a price for a r33 gtst box was 1500 including post and thought it was too cheap  
    • The SS button head cap screw on the back? If so, good to know. I presumed it was there for basic assembly and nothing more. 
    • Hello, everyone. I'm new to the forum. I have a 1989 Nissan Skyline R32 GTR. I have lost all power to the interior, including AC controls, the gauge cluster, turn signals, and windows. Stuff that still works includes the horn, brake lights, radio, and headlights. All fuses, in the interior and exterior boxes, tested good.  It starts and runs fine, just with no gauge power or anything stated above. No warning lights either. Things that I have tested: - Fusable link tested fine - No other fuses blown - Alternator good - IGN switch tested fine - With my power probe, I can backfeed power through the IGN pin to the plug on the back of the gauge cluster, and everything comes back on.    So my theory is something on the control side that sends the ignition power through the system isn't doing its job, or a wire is broken. (I would think that it is the ignition switch that would do that, but who knows?). The ignition relays don't fire (all relays tested good). So what tells them to fire other than the IGN switch?  I would really appreciate it if someone had some insight on this. I have tons of hours into this; I don't want to give up in defeat! I have the HD wiring diagram, but having all those wires laid out like that on one sheet of paper makes things pretty hard to follow.  Thanks for reading, and thanks for the replies.  Where should I look next? Thanks.
    • Install a MAP sensor pre and post throttle. Best data you could have for NA, then play with the bends and/or air box and see how much of inflection is created at WOT on the plot.
    • And gone to a new home  
×
×
  • Create New...