Jump to content
SAU Community

R34 Injectors; Same Dimensions As Xr6t Injectors?

666DAN

By 666DAN,
in Engines & Forced Induction

 Share

Recommended Posts

666DAN Grand Master

666DAN

Posted
Posted

Has anyone here got access to some XR6 Turbo injectors, looking at pictures of them they look very similar in dimension to the R34 top-feed items, just in need of a different harness plug.

As far as I can see physically the front end of the body is identical.

At $430 a set of 6 (rated at 430cc) from a guy on Ford XR6 forums they look a pretty attractive option for some of the R34 people chasing a few extra KW but on the duty limit of the factory items.

So anyone got one the can measure/send me so I can compare???

  • 3 years later...
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

ahh Dan, the trail blazer once again :D

I've been looking for new injectors, and all i could find were Sard or Nismo. Sard get shit-canned and Nismo ones are about $1300 delivered. No thanks. Scoured everywhere, can't find any 2nd hand Nismo ones and just came across 'deatschwerks' today. Was just about to search this section, and saw this thread.

Firstly, what cc did you get and what do you think of the Deatschwerks?? I believe people like the Nismo and blitz (discontinued) because they had a 4 hole spray pattern, how do the Deatschwerks compare to Nismo?

The only other mob that might be able to offer something seem to be RC engineering, again, another US alternative. Did you ever come across those?

Price wise the Deatschwerks are very competitive compared to the Nismo ones, but would be great to get some real life feed back

cheers,

chinny

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

i think the GTR injectors for R34 are 400 or 440cc, ok to around 300rwkw on the 26 setup, i think.

but i don't think they fit a NEO RB25, but haven't found a definitive answer yet.

And just did some searching for 'deatschwerks' and there's lots of hate and lot's of love... i thought i had stumbled onto something new'ish :D obviously not... i'm kinda leaning away from them now.

damn it, back to Nismo....

chuckie Mentor

chuckie

Posted
Posted
i think the GTR injectors for R34 are 400 or 440cc, ok to around 300rwkw on the 26 setup, i think.

but i don't think they fit a NEO RB25, but haven't found a definitive answer yet.

And just did some searching for 'deatschwerks' and there's lots of hate and lot's of love... i thought i had stumbled onto something new'ish :D obviously not... i'm kinda leaning away from them now.

damn it, back to Nismo....

GTR fit all top feed fit you may need to get new connector`s sr 20 fit to NEO ARE 370 GTR are 440 same as SR20 so may be look around a bit more cheer`s chuckie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...