Jump to content
SAU Community

Recommended Posts

i was just wondering what do people think would be better bang per buck setup

buy some R34 N1 turbos (steel wheeled and ball bearing core)

or just rebuild my stockers (R32 GTR) rebuild them with steel exhaust wheel, change to ball bearing core (if possible) and hi-flow them or just put slightly bigger compressor wheel in them

i know 34 N1's are about $2500-$3000 second hand and im guessin $1200-$1500 per turbo would be enough to rebuild them to my wanted specs

Now keep in mind im not chasing BIG power just want good response and prob at most 300rwkw

is this possible(rebuild to specs)?? or even a good idea??

wont be doing this for a little bit just wondering which is the best path

Thanks in advance

RellikZephyr

Link to comment
https://www.sau.com.au/forums/topic/97908-rebuild-turbo-question/
Share on other sites

my vote is go for the 34 N1s. they are a great turbo and a bit better than the older N1s. the specs of the GT-SS are pretty much identical to the N1s only difference is the N1s are a little cheaper.

i did search!!!!!!

and only ones i found were no where near the 3K delivered mark

so  if you know of the shops selling them for that    do tell

RellikZephyr

Give Tarek (RACESPEC) a yell or try his website (http://www.racespec.com.au/). I got my turbos from him at a good price. Have a look in the for sale section under businesses selling stuff. Dont know what Garrett availability is like presently, however.

OK, lot of crap here :) GT-SS are available as single turbos, but obviously you should buy the GT-R kit which comes with two turbos. I can say with certainty that both Nengun and Greenline have the kit available for between $3050-3200 (I know, because I checked a couple of hours ago).

As for the Garrett GT2860s in -5 spec, I suggest you check the results that some people have gotten (e.g. TommyK) and decide if you can live with that level of lag. The only person I know of with the smaller -7 spec (R32 TT) hasn't posted any results. Although the specs appear very similar to the HKS turbos (and I have little doubt the HKS turbos are at the very least based on the GT2860s), there is no confirmation they are the same.

Also bear in mind the HKS kit is a *complete* kit, containing all the necessary gaskets, studs, nuts, etc. Although it doesn't sound like much, try pricing these things.

Edit: As for the N1s, they look like a really nice option to me except they are rare and command a premium. Invariably they are second hand, nearly the same price as new Garretts or just a smidge cheaper than new HKS's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
    • Thanks for the details mate , for me I think being a daily driven and happy with a basic tune (630Nm and 310kw) . Seems to be working well I just put on a set of Michelin Pilot Sport 4 should help put the power down. I'm going to start looking a brakes and LSD in the future so I might reach out to you on options to upgrade the brakes. Cheers - Dee   
    • I have a HR34 GT... RB20DE My speedo doesn't work! The rest of the gauges seem to work, fuel and RPM. I did not notice if my odometer was going up when driving last.  Any ideas? Speed sensor? Hopefully atleast... Gauge cluster perhaps? Or is that unlikely because the other gauges are working?   Any insight is appreciated. This is a rather new to me car. Lol 
×
×
  • Create New...