Jump to content
SAU Community

Recommended Posts

haha its actually kinda scarey when a moderator says that !!  :lol:

I would be more scared about what mr Plod will say when he sees them!! :D

coming together nicely campbell, when do we get to see it in action???

Oh and i find it pretty funny that u've still got the back seat in :lol:

BTW peoples, its an r33 gts't, he's got a topic in the QLD section regarding the build and mods

Harness belts are not designed to be used at greater than 90 degrees to the wearer. To much angle and the protection level goes down considerably. For example, they won't hold you in the seat during a roll over, you will just slide up the belt until your head hits the roof.

That's why the seat belt installation regulations for CAMS and ANDRA specify angles. I strongly suggest that you read and follow them

NOS in cabin, I don't think that's a good idea. I posted this a couple of years ago from the Boston Medical Journal...........

"the hypoxia resulting from high enough concentrations of nitrous oxide may result in irreversible brain damage."

"use of it can damage the bone marrow and nervous system"

"nitrous oxide rapidly leads to complete loss of motor control, and anyone who breathes it while standing will soon reel about and fall down"

"nausea, neuropathy and myeloneuropathy"

"hyperesthesia, hyperalgesia and hyperhomocysteinemia"

"serious mood and personality changes"

"nitrous does kill brain cells"

"severe bilateral sensory dystaxia"

And the best one of all

"This 36-year old electrical engineer came to the emergency room complaining that he was unable to walk. Symptoms had begun 4 days earlier with "pins and neeedles" in both feet that gradually worsened and ascended to involve the knees and the fingertips. With worsening of the paresthesias (-no sense of touch or pain-) he noted difficulty in maintaining proper control of the movements of his arms and hands and trouble in walking. He also reported the sensation of electric shocks through his back and legs upon flexion of the neck. He denied bladder or bowel impairment but he had been unable to have an erection for the past week."

You make up your own mind on whether it's bad idea to have NOS and hose connections in the cabin with you.

:) cheers :)

Edited by Sydneykid

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...