Jump to content
SAU Community

Recommended Posts

haha its actually kinda scarey when a moderator says that !!  :lol:

I would be more scared about what mr Plod will say when he sees them!! :D

coming together nicely campbell, when do we get to see it in action???

Oh and i find it pretty funny that u've still got the back seat in :lol:

BTW peoples, its an r33 gts't, he's got a topic in the QLD section regarding the build and mods

Harness belts are not designed to be used at greater than 90 degrees to the wearer. To much angle and the protection level goes down considerably. For example, they won't hold you in the seat during a roll over, you will just slide up the belt until your head hits the roof.

That's why the seat belt installation regulations for CAMS and ANDRA specify angles. I strongly suggest that you read and follow them

NOS in cabin, I don't think that's a good idea. I posted this a couple of years ago from the Boston Medical Journal...........

"the hypoxia resulting from high enough concentrations of nitrous oxide may result in irreversible brain damage."

"use of it can damage the bone marrow and nervous system"

"nitrous oxide rapidly leads to complete loss of motor control, and anyone who breathes it while standing will soon reel about and fall down"

"nausea, neuropathy and myeloneuropathy"

"hyperesthesia, hyperalgesia and hyperhomocysteinemia"

"serious mood and personality changes"

"nitrous does kill brain cells"

"severe bilateral sensory dystaxia"

And the best one of all

"This 36-year old electrical engineer came to the emergency room complaining that he was unable to walk. Symptoms had begun 4 days earlier with "pins and neeedles" in both feet that gradually worsened and ascended to involve the knees and the fingertips. With worsening of the paresthesias (-no sense of touch or pain-) he noted difficulty in maintaining proper control of the movements of his arms and hands and trouble in walking. He also reported the sensation of electric shocks through his back and legs upon flexion of the neck. He denied bladder or bowel impairment but he had been unable to have an erection for the past week."

You make up your own mind on whether it's bad idea to have NOS and hose connections in the cabin with you.

:) cheers :)

Edited by Sydneykid

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...