Jump to content
SAU Community

Recommended Posts

If you have a lazy $4K lying around, you could go the 40foot container :lol: ... but I guess you don't have THAT much stuff.

If you can box up what you've got and take precise measurements of the boxes and it comes under a 2 cubic meter area, you could do sea freight for about $1000, or less for 1 cubic meter. Depends on who you go with for sea freight. But what we really need to know is how much stuff you want to take back?

just bite the bullet and pay for shipping via post office. If you really want to save your yen get the cheapest shipping method (via boat) it will get there in a few months however. If you think you can fit it all in luggage, you can pay an extra fee to bring extra luggage (over the weight limit) into the hold, however that's fairly expensive as well.

In summary, it will cost you some ¥

We had the same problem last January when Beer Baron and I walked into our hotel rooms and literally had so much gear and so many parts we could hardly move.

We had to get a cab which was packed to the roof, to the airport, and im still proud about getting my 30 kg Trial back into the overhead locker as carry on, though I really dont advise trying this - I certainly wont be doing it again

O RLY?  How are you going to carry back my HKS GT-SS kit :D 

Did you get charged extra baggage fees (IIRC, they can be very expensive)?

No extra fee's if you can manage to get it onto the plane as hand luggage.

As for the GT-SS's - I dont think so Lucien :P

hey guys thanks heaps for the input, really appreciate it! just called qantas to find out prices for unaccompanied luggage and they're quite hefty - Y1410 a kilo. That's not far off the over-weight charge for normal baggage.

the post office looks a little better - Y6750 for 10 kilos (sliding scale, looks like).

but you're right, now that i think of it i've never been charged over limit ever. i might risk it... :)

yeah, nick and i had a nervous packing session. we went down to our hotel loby and borrowed their scales. from memory we each had between 50 and 60 kilos... hmm the limit was 20 kilos needless to say we weren't looking forward to any excess charges. like nick i certainly wont put myself through that again, particularly as we will probably buy even more stuff this time.

i'd say post whatever you can, it will save you major headache, especially if they do say 'enough is enough' and refuse you boarding without checking in some of your carry on.

as long as you're not stacked up like a packhorse - you'll do okay. And make sure your bags are under the weight limit. They care more about overweight bags than a total that is over the limit. Whether or not the plane is full is another thing - so I guess time of year becomes a factor.

http://www.post.japanpost.jp/english/fee/index.html

there are special rates for books too - but make sure you only have books/printed matter (they DO check)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...