Jump to content
SAU Community

Recommended Posts

hi,

ive noticed ever sense i took my boost resrictor out at between 5000-7000 rpm i get this surge,like its missing or something?

could it be fuel cut defender or something along those lines,

or could the turbos be on the way out also could it be bad coil or something electrical?????

sorry if its been said b4 but i couldnt find nothing on this topic

cheers

Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/
Share on other sites

Hmm

when I first got my R32 - I used to get this quite badly too. I figured it was fuel related – it seemed to surge (continue to drive or accelerate) when I lift off the throttle at speed (freeway driving).

Just by way of a process of elimination for you, I've done a full engine rebuild, new R34 N1s, new plugs, new fuel pump (Tomei), new Spiltfire coil packs, new SX fuel regulator, new fuel filter and I've even had my std injectors cleaned and flowed. (not just to fix this problem – obviously)

Since I installed a PFC with the matching EBC - the problem is much better - which is to say that I still get it - but only very rarely, and no where near as bad (the passenger can not notice any more).

I told my tuner that I was having this problem (when he was installing the PFC) and he said he could tune it out (he seemed to have heard of this problem b4). The car also used to hunt @ idle (and even stall some times) – but the PFC has fixed that too.

So - I suppose what I'm saying - I'd be interested in figuring this out too

Edited by itbmils
Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/#findComment-1789987
Share on other sites

How many Psi you running again gun?

I'll answer first - just 'cause I'm here

If he's just removed the restrictor - on a std GTR that should bring him up to about 14psi. (just under 1 bar I think)

I currently get the problem at any level (I have boost pre-sets for 8/10/15/18 psi)

Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/#findComment-1790000
Share on other sites

Compressor surge (?) - the turbos just aren't efficient at 1 bar and those revs.

Maybe the turbos are out of balance. The compressor and exhaust housings can be rotated relative to each other, changing the point at which the wastegates open (mate with a R33 GT-R had the problem).

Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/#findComment-1793238
Share on other sites

mine is actually quiet bad as i if i gas it in first it just dies at high rpm,2nd gear it does it on and off through out the revs,i think i might put dual stage in the car and put boost back down to 9psi and wait till i upgrade me shit b4 running anymore boost

Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/#findComment-1797726
Share on other sites

  • 3 weeks later...

car seems to be doing quiet abit on the way to and from the nats these past days,it also dumps a shit load of smoke sometimes in 1st gear when u up it,looked to be darker smoke so could it be fuel cut maybe,im putting dual stage in to get boost back to stock soon,hope thats fixes it

Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/#findComment-1844254
Share on other sites

just thought i'd add what i heard, for my two cents worth.

My 32 gtr arrived from japan running 1.6 bar ( yikes ) it surged under full power like a muther funker. Since i have turned it down ( blitz dual sbc ) to 1 bar, it doesnt do it so bad. Stuff i have read says that its a pretty common prob with gtr's running more boost ( and or, aftermarket turbos) on a standard manifold.

Power fc may help a little ( i think you already have one "gun" )

But anyway thats what i heard.

Link to comment
https://www.sau.com.au/forums/topic/98470-r32-gtr-prob/#findComment-1844328
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...