Jump to content
SAU Community

Recommended Posts

any one know what a brand new air flow meter is worth for a r33 gts-t at all. my sons r33 was running like crap so we cleaned the afr for very little difference .so then we took the afm off my r33 and bolted it onto his car and farken hell what a difference it made so much smoother and goes like a cat with deep heat on its nuts plus his car has been using so much fuel its not funny so im hoping the afm was the cause of that as well . really dont want to put a second hand one back on his car just in case it is half buggered as well but have no idea what a new one is worth ? anyone know and would you have to buy a geniune one from nissan or can you get after market ones?

cheers midlife crisis

Link to comment
https://www.sau.com.au/forums/topic/99495-afm/
Share on other sites

I recently had the same problem mate. My afm was screwed when I bought the car. I got it reconditioned for $350. Took a while for them to get the specs right but when they did it really cracked. I have heard new afm's costing from about $700-$950 brand new! If you can try and find a decent second hand one or get it reconditioned like mine. New ones are pretty rare and expensive.

Link to comment
https://www.sau.com.au/forums/topic/99495-afm/#findComment-1813754
Share on other sites

gee i didnt think they would be that expensive might have to go the secong hand way . as for the ecu its just standed car just has a cat back exaust and a pod filter . he is not really chasing power as it goes pretty hard as it is just wants it to run clean , lol i dont hold much hope of getting my afm back of him now :-(

regards midlife crisis

Link to comment
https://www.sau.com.au/forums/topic/99495-afm/#findComment-1813950
Share on other sites

If you can use a soldering iron why don't you have a go at repairing your old one?

I did mine a couple of weeks ago and it transformed the car.

No more black smoke, it no longer stalls or hiccups and I get another 100km a tank.

You just cut through the outside edge of the sealant around the cover panel and carefully pry it off.

Unsolder the metal shield on top of the circuit board.

It's best to remove the solder with some desoldering wick.

The problem with mine was where the socket pins are soldered to the circuit board the solder had cracked.

Probably from someone wriggling the plug to remove it.

Just heat where the pins cross with the tip of an iron to melt the solder and add a bit or fresh resin-cored solder to each joint.

I also did a blanket resolder of the whole board, while I had it apart, just to be sure there were no dry joints but I think it would have been ok if I hadn't.

Resolder the shield and reseal the cover with sikaflex or silicon and your done.

Link to comment
https://www.sau.com.au/forums/topic/99495-afm/#findComment-1814266
Share on other sites

Cheap second hand SAFC will do the trick, scale the voltage back to the origional afm values.

Definitely worth while if you need an afm now and have plans to throw a safc on it anyway.

Think of it as for the price of a new std item from nissan you can have your self a bosch z32 + safc, making more power and slightly better fuel economy.

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/99495-afm/#findComment-1815762
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...