Jump to content
SAU Community

SiR_RB

Members
  • Posts

    4,521
  • Joined

  • Last visited

  • Days Won

    2
  • Feedback

    100%

Everything posted by SiR_RB

  1. home job nismo air flow meters? explain? lol
  2. if u can get it for free, then good ! but if your gonna pay for it i would go for something abit thicker like 10w-40 etc
  3. try leaning the hot start out. i had a very similar problem
  4. I blew my cooler hose going through the NATO park near stanwell tops, I also herd the bang and black smoke, All my intercooler pipes seemed fine and I started to worry that it was something else, I decided to remove my front bar on the side of the road (had to wait for dad to bring tools which took him 2hours to get to me) and the pipe going into the passenger gaurs was off. Massive pain in the ass especially if it's hard to get too !
  5. Depends how good ur coilpacks are. Mine were fine at 14psi and 1mm gap, but higher psi I had misfire problems so I changed my coilpacks and now I run a 1.1mm gap with 18psi. Try it at 1.1pm and see how it goes
  6. cant go wrong with nismo/sard/tomei direct drop in fuel pumps like others have said but there is a guide in here how to make an 044 intake
  7. if only all GT-T's looked this good
  8. heat and turbine speed kills cermaic wheels
  9. hey guys, just wondering if the nistune ecu (r32 gtr specific) will be able to run NISMO air flow meters? im pretty certain they are in the air flow meter drop down box, but is this function online? has anyone got a nistune on a GTR and is running NISMO air flow meters? thanks
  10. High reading Dyno...never herd of anyone running 280awkw with stock ceramic r34 turbos. I believe 260-270rwkw is probably abit more realistic?
  11. found one thanks guys !
  12. yeh very important to have the engine at operating temp and to remove all spark plugs and crank the car while throttle is all the way Open...i even removed my fuel pump fuse too
  13. 160-162psi, bought it like that from japan. but alot of the gaskets/and bolts etc are very very new so who knows whats in there
  14. hey guys im after this stock rubber intercooler pipe circled in red - if anyone has one in good condition ie. no cracks ! send us a pm thanks
  15. Yeh sounds like a tired engine Mine got comp tested few months back @ 160psi even across each cylinder
  16. The hks silent are loud? Even when putting around normally on the streets? I'm not too fussed if it's loud when your giving it stick !
  17. Would the new hks hi power silent flow 300+rwkw with -7's and all supporting mods, or are they a it restrictive to keep the sound level down?
  18. usual rb25 flat spot. turn boost down below 10psi
  19. Turn the big round button once, this will show you ur current boost %. Then turn know anti clockwise to lower boost %. Once your are done push big button down to save changes.
  20. LOL only thing i dont like about my NIStune is it doesnt show knock readings for the r32 gtr, but apparently Matt has been trying to make it work for years now...
  21. Or you can sell me the greddy pipe kit you have and I can give you the stock "twin turbo" pipe etc
  22. cheers Jez will try that too and Chris, i might need to take it to my auto electrical mate to do that test for me if all else fails. although i did buy some super fancy battery last week !
  23. update: replaced with genuine nissan coolant temp sensor...still does it ! tomorow i will be changing my fuel reg so fingers crossed this solves my problem according to consult only one of my o2 sensors is working but i didnt think they have anything to do with starts/idling ? plus we tuned around them and i get excellent fuel economy (easy 430kms per tank, and thats not driving like a nana car idles 100% perfect, no hiccups or anything
×
×
  • Create New...