DoughBoy

1/8 mile ET = (1/4 mile ET *.655) - 0.22 *blatantly copied off another internet site*

Oh sorry, have been a bit busy and not checked up on this thread. Stan - pm sent 2835R - have got 3 good ones here, minimal shaft play, good condition. All have either the T25 flange internal gate (0.86 A/R) or 1.12 ext gate housing Geoff - Alloy pipe kit was sold with a turbo setup Black32 - checked the diffs out, all I have left are 3.54 ratios and a 3.69. Have 4.36 and a 4.11 but they stay with the aftermarket mechanical diffs that they are bolted to. Will update the first page, have sold a bunch of stuff already.

It wasn't a lag monster, it was a Skyline built for cruising. You could call it a Skying.... or a Cruiseliner? heheh

I bolted on a HKS T51R Kai BB for shits and giggles to a stock RB25 longblock. Had a Greddy plenum/115mm intercooler/PowerFC.... was a rocketship i tell ya! Had to flatchange gears to get some boost into the system, made next to no boost in 1st gear. Only ran 9psi, was a bit timid with boost at the time. Had to bump up the rev limit on the dyno to 8500, when it hit boost at 7k it fried the tyres. Oh, made power for alot more than 2 minutes. Took it off out of frustration (and had another turbo to try out). Even tried out circuit racing at Eastern Creek with it, Roy and I couldn't stop laughing at it (well, until it fouled the plugs and nearly had to be towed off). Visual appeal was at a maximum though.

HKS make a stainless highmount T25/28 flange manifold for RB20/25. External wastegate though.

White car 12.0 @123.7 Black car 12.1@119 Both 33's

R33 GTS-t is only a 2 rib pulley, R33 GTR is a 3 rib that will fit your balancer.

No, the comp wheel off a T04Z. ~66/84mm

Everyone seems to say that, man, woman or sheep

There's a Skyline parked in it, that moves under it's own power ><

I've got a 3 inch Nismo full race exhaust, Jasma approved. Is that big enough to satisfy you?

223? that be some serious MPH

Uh? I think Jimmy Hart called him, asking for his title back.

Hey saw your car run, have you changed the gearbox over to a powerglide now? Looked to be a fair bit quicker.

This thread's about Mark's black Honda civic, I think you might be referring to the GTR?

Abcent - GTR + GTS-t gearboxes are not interchangeable. Some internal parts are, but it's not a direct swap. Mr Cash - Sorry, no RB20/25 stock replacement dump pipes. I do have a GTR replacement item, new, made out of titanium but thats $1200. Xfixiate - I have a set of 6 std RB26 injectors, will PM you Aridyne - The Trust manifold is highmount, and has a Mitsu 3 bolt flange

Which part of the exhaust are you taking about? Exh manifolds will fit, R34 dumps have an EGT hole but will fit, front pipes and cat back won't fit as the floorpan is different.

Other- food distribution company. Funny enough mainly dealing in bakery products

He was there, he only turned up to win the stock GTS-t/RB25 category... and turns out there was some stout competition!

Updated with RB26 parts, will continue to update and then add pictures.

I think you might have to stay till the awards ceremony to claim a prize? Which is why Bu5ter didn't clean up? That high boost run would have put the "Top Secret" thing to shame!

193<190?

I think you'll find it's a load of bullshit, too many unrealistic claims goin' on with a turbo like that.

But Charlie, it's only for cars slower than 11.00 seconds.

Impul - the Rays nuts are black Stan - I've got both, will PM you Black32 - I'll have a look, will have to open a few diffs to check. driftking - yes they fit on an S2 GTS-t