Jump to content
SAU Community

lachlanw

Members
  • Posts

    2,139
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by lachlanw

  1. a bit token try hard in my opinion .
  2. bro its a show car with custom two tone interior . worth millions
  3. my car only has one nipple and its for the power steering. rs four s
  4. yeah dunno y i said bov return pipe .meant to say back into pipe from afm to turbo which the bov return also goes into
  5. my data log shows my afm has been up to 4.97 and i aint even done much to my car 6288 rpm 4.96 afm 85.99 duty cycle 84kmh 22 timing rs four s with HDI fmic and good cat back . r32 wastegate actuator . 11psi
  6. can i have one with suction cups on its feet ?
  7. drive with your boost gauge on the highest vacuum you can get .
  8. YOU LOT NEED TO MAKE SURE YOU ARE NOT CUNFUSING A SPRUNG CENTRE CLUTCH WITH A CUSHIONED BUTTON CLUTCH
  9. yeah ive heard the,ll slip if you heat them up to much
  10. how many rokets are left where the roket covers were?
  11. spray soapy water on everything and see what you can find
  12. and you couldnt "tune them the same" . eg neo would make more power/torque on same boost or same power/torque on less boost .
  13. adding those mods to them will multiply the difference between them . its differences like nvcs is continusly variable as opposed to on/off. begger exhaust valves . solid lifters/diff cams . and 5 years further electronic development
  14. can an rb25det even rev to 9000+ rpm ? wouldnt it lean out/chuck a rod//the ecu even mapped that high/valve bounce if the valve springs are as shit as people make them out to be???? just curious
  15. except the guy on the gtr.co.uk forum is wrong about how A-LSD works.
  16. yeah who cares as long as hes not calling it a rocket cover like a lot of honda drivers in nz do
  17. yeah my mate just walked past and right as i spotted it he goes "lookin at some porn ?" i was like yeah acctually lol . only let down is i though it was a r35 wagon . dreams are free
  18. also tire pressures ,wheel alignment , how much crap are you haulling around, get a vacume gauge and use that to drive nicely
  19. have you checked the o2 sensor ? and what state it your air filter in /get a new/less restrictive one
  20. never heard any thing of the such. you could just unplug any of the sensors /fuses and it will stop working anyway .
  21. adjust the throttle cable so its got f**k loads of slack so to the floor is only like half throttle . and put some paint on the adjusting nuts
  22. you could unclip the waste gate actuator from the flapper valve arm . it will make it run no boost but still driveable
  23. didnt do very much of a search then .
×
×
  • Create New...