GTR81

Lincoln 180c is pretty good, had a few on the last job i was on and they took a bit of punishment but kept on going.

I would be interested in complete engine and cold side if you do part out

Hi guys, selling a hks hi power silent exhaust. It's for a 33 GTR , brand new hasn't been out of the box. $900 Pick up is preferred but I can post if your patient Located in Gladstone Qld Pm for phone no or contact on here

Do you have the standard ecu?

So it turns out there is adjustment for camber on the top bolt that bolts to the bottom of the shock. just need to open me eyes next time

Yeah a different amount of camber, more positive camber on the drivers side. it hasn't had an alignment but its easy to see just looking at it and the spirit level says the same. I can't see that you can adjust the camber in any way.

Ok guys i remember a while ago i read on the 31 skyline forum about the front wheels having different front camber and 1 wheel sat out a little further than the other side on a 31 skyline, which my 31 coupe has the same thing. Just put it down to being an old car and no idea what could have happened to it over its 25 odd year life. Now the thing is i just put new wheels on my wifes wrx on the weekend and now its very obvious that has more positive camber on the drivers side front wheel even though it has standard suspension all round and she bought it brand new in 2009 so i know its never been in an accident at all, its done just over 100k and everything seems fine. It has always worn out the inside of the front right tyre first so id say its been like this from new just never really noticed cause the standard wheels tuck in so far i guess. So the question is are manufacturers slack, is there a reason for this or am i missing something?

Are you willing to post? And what's the manufacture date?

Forged engine Jun crank Ported head HKS 272 10.2 lift cams HKS 2530 turbos 4" exhaust 425 Kw@ wheels on 25psi with E85

Does the turbo sit in the same place as the normal manifold?

Hi sir_rb, sorry I didn't reply sooner but for some reason your pm didn't show up on here, I just got the email.Sorry but I don't really have time at the moment between working long hours and trying to build my drag car spare time doesn't exist. Last time I emailed titanium Joe they were starting to sell a few ti mandrel bends not sure if they were doing 4" ones or not but that maybe an option unles you specifically wanted the lobster look?

yep thats who i use

I have tried a few times but unless your buying 10 full lengths you won't have any luck, USA is the go for titanium

Does anyone know what size tubing they used on the gts-r manifold?

I've got one in my drag car but its not going yet, I'm pretty sure you can't down shift with them. I think the car has to stop to select first again or something like that? They also need pressure to hold them in each gear which the air shift set up will do, but I can't really see it working on the street. Should be someone else out there that knows a bit more about them

Yep there is a few servo's with 98 and united has e85

Hi guys, Got a set of Rota rb wheels for sale. Wheels are in pretty good condition, no gutter rash at all just a couple of stone chips or marks from something It's in the title but size is 17x8.5 with a +4 offset and they are 4x114.3 stud pattern Price $400 Contact on here or 0407418899 Pick up only for now as I don't really have time to post them, or if your not in a hurry I can possibly deliver Them between here and Brisbane Location is Gladstone

Hi Alex, Are the lmgt4's 9 or 9.5 wide? First post says 9.5 and post above says 9. Might be interested if they are 9's Darren

The angle and length of the segments will determine the radius and how "round" the lobster looks so it comes down to how much room you got and whether you want it to look like a mandrel bend with lots of welds or a few straight pieces of tube joined together. I made mine 5 degree's and about 22mm long on the long side. There is a few pics in this section somewhere

Put new rear cradle bushes in too while your there

Terry at award diff and gears in Sydney done mine, good price too

How much for the clutch pedal assembly and master and slave cylinder?

Hi mate, Is the seat carbon or fiberglass?

A water pump blanking plate for Nur33

Yep more spinach, they do come undone but very tight and I think they got thread locker on them too