Jump to content
SAU Community

Bsa

Members
 View Profile  See their activity

  • Posts

    1,316

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by Bsa

  1. Bsa
    Intake manifold gaskets much easier with engine out might as well while replacing the rest
  2. Bsa
    Easy job easier to remove power steer and ac from the block pull off anying connecting it then jack under box remove the bracket then remove nuts from engine mounts 3 hour job if you stuff around
  3. Bsa
    Get one shot gun one of the turbos look good on a sr
  4. Bsa
    I think you would just have to run a spacer that's all
  5. Bsa
    Kando gear is good tho not sure on there gates but could always be the tester
  6. Bsa
    im sure jez could have a look just to be sure untill you get your tune done properly he will be down with me anyway
  7. Bsa
    will yours be getting tuned this weekend
  8. Bsa
    i would be putting it in the dyno to cheack the tune there are heaps of places on the coast no nee to go to sydney. have you comp tested the engine?
  9. Bsa
    need to find out where in wollengong would sell e85 or jez could be a nice guy and make up 2 maps so i can switch when i need to haha
  10. Bsa
    the de rb25 dont just like all of nissans de motors but the det rb25 will def have squirters as im using them in my sr20det
  11. Bsa
    i would like to but it will be daily and e85 is a pain to find tho i will be running a laptop in the bm so i change the maps for track events
  12. Bsa
    Post a pic and you will soon find out
  13. Bsa
    Yeah I will see how it goes against the 20 sheet response should be simular between the sr and rb20 I only want around 230 base with 18 pound when are you seeing full boost in the Silvia
  14. Bsa
    Looks like it gave a good power curve but was falling off at 6000 rpm and seen full boost at 4200 maybe it was the gate setup going to miss revving to 8400 like on the 20 haha
  15. Bsa
    dont have 1400 at the moment to spend only looking into options im moving 2 hours away and is going to cost me a fair bit so money is presious at the moment
  16. Bsa
    so havent done much dummy fitted the motor and wired up a cd player. will have to make a custom sump never relised the sr was so tall but thats not to worry. a few photos of goodness. ill be using a rb20 box behind the sr i just need a bell housing if anyone has one?
  17. Bsa
    hey guys im jumping back on the wagon and going a kando again only on a sr this time (waiting for coment fron gtscott hahA) in thinking of running the tdo6 but the 18g does kando do the 06 in a t2 flange anyone know? dori i can give you a hand on sat as you will need to remove the front housing more then likly to fit it low mount i did anyway on the 32.
  18. Bsa
    That totally sucks man it's a nice build good job.
  19. Bsa
    Copy of comp test if possible. Oil could be pushing past your turbo.
  20. Bsa
    Yeah should be ok work on the Beemer may stop for a few weeks because I might be moving to the gong for work I'm dummy fitting the motor this arvo so I can wip up some mounts.
  21. Bsa
    Using a multimeter I think it's .4v or if you have a nistune you can see it on your laptop contact DVS jez he knows about all that stuff he can tell you step by step how to
  22. Bsa
    How much posted to 2261
  23. Bsa
    Tps man should be .4 I think
  24. Bsa
    I'm using a kls core with gtr tanka hope it goes ok car looks tidy man doing a good job
  25. Bsa
    How much where they I want a set
×
×
  • Create New...