Jump to content
SAU Community

Bsa

Members
  • Posts

    1,316
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Bsa

  1. I have never run a Nissan oil filter I know cars running 300+ kw with out a Nissan one it's better to buy the filter you know fits rather then muck around buying it from the states it will only be on there 5 to 10 thousand km If serviced properly
  2. Y not buy them from repco supercheap or bersons
  3. What Is the spool point 4200 for 290 I would be happy with 4500 kinda have to expect that type of thing
  4. seems a bit suss who highflowed it? wack the proper seal on there should fit if its the same turbo
  5. they both suck equal haha gear box out so much easier
  6. rb25 fits i ran one on my 20 just cut off the old plug and solder or crimp on the new conection
  7. how much to highflow a s15 turbo and what could be expected out of it? i did a read but would like to hear first hand and yes its for a sr
  8. im fairly sure its steal thats what mine had in it when i pulle the comp cover off
  9. sender might be out or the cluster is no good try a different cluster if you can
  10. They are only new that's tm autosports old shop before they shut down call DVS jez he owns a 300kw gtr
  11. Putting boost into it will be the issue just need to make sure there is no restrictions
  12. Transmission fumes one of the worst smelling oils going I recon it's rocket cover gaskets and the half moons they are very common to go if not replaced I can check it out this weekend as I'll be down that way
  13. fill the tank to the brim remove the cluster then remove the plastic sheild now your gauges should be exposed the the gauge to the full position thats what i did on my 32 and i never had a problem
  14. where are you located? i can do it
  15. You have pm mate
  16. Doing the dame thing for dori34 this sat
  17. Haha 280 sounds nice. I'll send one through
  18. I'm keen to see how the internal gate 06 goes with 17 pound with a built motor. S13 Black top with forgies 8.5 comp
  19. L2 means I would have to run external gate I'm trying to keep away from it reason for manifold change is the turbo will sit mega close to the abs 2mm on the BMW I want to bring tge turbo forward then I can run bigger. Rocker stoppers and cams are def on the list need to get it running first but
  20. Im thinking about putting a t3 flanged manifold on the sr are running the same turbo I run on my 20 any idea on response times?
  21. Would be a wicked fast car
  22. Everything costs money unless you bolt a stock one on. Plus good turbos can be had from 750 (kando) then your usual mods same as hypergear. Also is there oil in the dump all turbos have some shaft play no matter how new.
×
×
  • Create New...