Jump to content
SAU Community

Recommended Posts

I washed my car about 3 days ago and did it quite well, but unforetunately the wind and sprinklers totally ruined all my good work so I had to clean it again *sigh. So this time I took some pictures and cleaned it even better :). Plus I got myself a new camera for christmas.

And heres the steps i took to wash my car:

1. Have a dirty car....check

2. Wet the car first so when you are rubbing the car to wash it you don't scratch it

3. Bucket of soapy water and off you go

4. Dump 2-3 buckets of soapy water over the car

5. Rinse

6. Wait a few minutes for some of the water to evaorate or run off the car

7. Chamois the car, rinsing the chamois every so often

8. Waxed using soft clothe and rubbing applied area for ~8 seconds or until dry

9. Then did windows and interior and wheels for the extra cleanliness B) (My windows were hella dirty on the inside)

So we start with the filthy car....

filthy1sa.jpg

Bloody sprinklers :blink:

filthy24bn.jpg

Now we select our weapons of choice, as you can see theres a whole range of cleaning products I used here. I just got a brand new Chamois Clothe for christmas too so I can use that for the rub down B).....

weaponsofchoice7en.jpg

Didn't take any pics while the car was wet, but after it was washed and chamoised dry I took a break. Twas quite hot today :P

shotfrominside1zh.jpg

Bout 2 hours later:

clean38bq.jpg

clean63ri.jpg

clean50uy.jpg

This shot shows my bumper + side of garage door damage :(

clean22si.jpg

So, go get some good cleaning gear and wash your car too ;). And remember not to do it when your sprinklers are due on the next day...Also to my utter dismae, I had this lovely big pool of engine blood under my car when I moved it :(. Time to book it in for a service I thinks...

bleeding3lb.jpg

cheers

Tom B)

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1827967
Share on other sites

Saw your car yesterday...nice car---i didnt even know you lived around the corner from me...*spooky* B)

yeah!

as I was washing it at my house?

you drive a Stag Wag?

.......I need some spacers...it looks so sad with that offset ;)

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1828930
Share on other sites

i put the pressure hose on cherry red does that count?

with a red dirt driveway it takes mabe half a day to get covered in dust again so i just go with a quick wash monthly and polish at least half yearly other than that its "hmm cant see out windscreen best get hose"

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1830840
Share on other sites

Thats an option too, I just don't have the money at the moment and I need to get some other things done first....I was thinking about those Do-Luck double 'sex' rims, but they are 11ty billion dollars too expensive

i like multi spoke deep dish and can't seem to find any

Now thats deep:

cat-in-wheel.jpg

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1832694
Share on other sites

It always seems when I wash my car it will rain about 2 days later. Happened again today, but because of the power outage last night, it meant I couldn't get my skyline out from behind the rollerdoor, for some reason it was stuck & couldn't open it manually. So it's still pretty clean, me 1 weather 0.

Whenever I wash my car, do small sections & wash the soap off straight away, otherwise the soap dries out very quickly & will leave marks. I just wish my car would be able to stay this shiny:

post-17137-1136293396.jpg

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1833042
Share on other sites

With the Polish on the Headlights, is it on going? is there anything you can do to clear it up properly? or just buy new headlights?

thanks

i got a autosol prduct called shine in a kit i bought to do my strut brace and tried that on the headlight and it came up great much better than the plastic restorers ive tried before dont know how long itll last tho

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1837489
Share on other sites

hey os, wack a bit of car polish on the right headlight to clean her up a bit

The car's winking mate, try & keep up :)

It's just the way the light has come off from under the roof in the picture, there's nothing wrong with either of them. To the left of the car is my house & is completely covered, and about a metre to the right is the fence where the light comes in.

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1838521
Share on other sites

The car's winking mate, try & keep up :)

It's just the way the light has come off from under the roof in the picture, there's nothing wrong with either of them. To the left of the car is my house & is completely covered, and about a metre to the right is the fence where the light comes in.

ahh ok mate, no worries haha :)

Link to comment
https://www.sau.com.au/forums/topic/100287-washed-my-car/#findComment-1838804
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...