Jump to content
SAU Community

Cams, Exhaust Manifold, Head Gasket

Neo
 Share

Recommended Posts

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
ForSale: Perth

Tomei Poncams for RB25DET Series 2 R33 or R34 - $820

HKS 1.2mm Stopper type head gasket RB25DET - $430

Stainless Steel low mount manifold RB25DET -$400

PM me if anyone interested.

All stuff is new

Cheers

Neo

Can i get some photos of the manifold? and is it a chinacopy?

lukits01 Experienced

lukits01

Posted
Posted

interested in some details on the manifold as well

a pic would be great

what grade SS is it made off?

who made it?

Does it mount the turbo in stock location?

how long has it been used?

cheers

  • 1 month later...
Smurf R33 Rookie

Smurf R33

Posted
Posted

Hi mate,

If the head gasket is brand new and still for sale, id be happy to take it off your hands. Please let me know if its been sold, if not im in QLD if thats not to much trouble.

Thanks

Ptath

Abo Bob Grand Master

Abo Bob

Posted
Posted

Not trying to annoy you or anything but the series 2 R33 RB25 head and the NEO RB25 head are vastly different. The former having hydraulic lifters and the latter solid for example.

The cams should fit one OR the other, not both.

I'm pretty sure you have the R33 series 2 RB25 cams there mate because the R34 ones are either 252 or 260 degrees in duration but yours are 256. Lift is different too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Duncan
      NC MX5

      By Duncan · Posted

      Perfect day for a pie, really needs a soft top in this weather though
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Prime parking, she is a little girl...LOL
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...