Jump to content
SAU Community

Recommended Posts

Hi guys, i just gave my car a good wash and wax and noticed the little "GTS25t" sticker thats found on the back of r33s is in fairly bad condition and pretty much just looks like crap, i was just wondering if anyone knows where you can get new ones from?? Or if you even can??

Link to comment
https://www.sau.com.au/forums/topic/100341-gtst-stickers/
Share on other sites

you can't really get an aftermarket one. You can order it from Nissan but prepare to pay dearly for it. Your best bet is to get one made up at a decal/vinyl/lettering shop. Any decent one should be able take a photo of it and then clean it up and cut you a new one in matching colour.

Link to comment
https://www.sau.com.au/forums/topic/100341-gtst-stickers/#findComment-1829391
Share on other sites

I had heard you can order the little silver 'v spec' stickers for GTR's through nissan dealers pretty easy, should be the same with the GTS-T ones...

But yeah, proably easier to get one custom made, course it wont look the same or last as well... most people seem to debadge theirs altogether

Link to comment
https://www.sau.com.au/forums/topic/100341-gtst-stickers/#findComment-1829795
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...