Jump to content
SAU Community

Recommended Posts

Hi all,

The coating on my wheels has been bubbling and flaking off in places since I've had the car.

It's kinda annoying me so I was wondering if anyone has advice:

1. Ignore and don't worry

2. Get them sand-blasted and powder-coated

3. Other options? Wheel repair/reconditioning places???

Option 2 is probably sensible but - wank factor aside - I'd like to retain the Nismo logos if I can...

If anyone knows of somewhere reliable in Brisbane to get this done, the advice would be appreciated, thanks! :rolleyes: Pics attached.

post-17890-1136648515.jpg

post-17890-1136648541.jpg

post-17890-1136648574.jpg

Link to comment
https://www.sau.com.au/forums/topic/101060-getting-wheels-re-coatedrepaired/
Share on other sites

I am relying on a 5 year memory but Chris Neil from Wheel Revolution.

Unit 2/18 Randall St Slacks Creek.

He's the man to see.

I second Chris as well. Yes he' still there and I've used him before. He's even got a write up in the current issue of HPI, go have a read. Depending on the damage repair work starts at around $40 per rim. He has the ability to bring your wheels up to brand new condition...if I had Nismo's I'd definately spend the $$.

Hi all,

The coating on my wheels has been bubbling and flaking off in places since I've had the car.

It's kinda annoying me so I was wondering if anyone has advice:

1.  Ignore and don't worry

2.  Get them sand-blasted and powder-coated

3.  Other options?  Wheel repair/reconditioning places???

Option 2 is probably sensible but - wank factor aside - I'd like to retain the Nismo logos if I can...

If anyone knows of somewhere reliable in Brisbane to get this done, the advice would be appreciated, thanks!  :mellow:  Pics attached.

I am relying on a 5 year memory but Chris Neil from Wheel Revolution.

Unit 2/18 Randall St Slacks Creek.

He's the man to see.

Hey jamac go with a wheel shop or panel beater, don't get the wheels powder coated just have them painted in enamel (sp?).

They will not build up the dust as quick & r a lot easyer to clean when in enamel...

Hey jamac go with a wheel shop or panel beater, don't get the wheels powder coated just have them painted in enamel (sp?).

They will not build up the dust as quick & r a lot easyer to clean when in enamel...

enamel your joking rite ?? :mellow: I wouldn't paint my dog kennel in it, thats if I had a dog kennel. 2pak or powder coat only

the guy at street art wheels up here at kunda park has been toying with a chrome finish for wheels for a few years now, not sure how he does it but he also does scratch and repair of mag wheels and repaints them in any colour u like. its called

"StreetArt Wheels,

1/ 33 Enterprise St Kunda Park QLD 4556

ph: (07) 5477 0240 Wheels & Rims--Automotive

Edited by 85URK

The HPI article only touched on rim repairing but overall they provide wheel restoration as well which includes painting. I had a set of Volks that had stone chips and gutter rash and all they did was restored it and repainted it in its original color...came out brand spanking new!

enamel your joking rite ??  :mellow:  I wouldn't paint my dog kennel in it, thats if I had a dog kennel. 2pak or powder coat only

lmao go right ahead & spray your wheel in 2pac lmao if u got the $$$$ & powder coat tends to make the brake dust build up of the wheels more done it my self so know about it enamel is easy to fix if u get chips & is not to costly it depends on u if your going to use the wheels on a show car & have the money to get em done in 2pac go for it or if money is a problem go for the powder coat or enamel ....

lmao go right ahead & spray your wheel in 2pac lmao if u got the $$$$ & powder coat tends to make the brake dust  build up of the wheels more done it my self so know about it enamel is easy to fix if u get chips & is not to costly it depends on u if your going to use the wheels on a show car & have the money to get em done in 2pac go for it or if money is a problem go for the powder coat or enamel ....

ever heard of a fullstop dude lmao! :mellow:

For machining, buckles, gutter rash etc: Dean at Depulu in Ashmore

For refinishing, painting and polishing: Dean at Mag Wheel Services in Southport.

I have personally used both these guys on more than one occasion and they are great at what they do. I absolutely swear by these guys!

I also take my wheels to Depulu for balancing, although they don't really do this as a service, they're the only place that seem to be able to get it right and are usually happy to do a balance only job. Also its noteworthy that these guys never use rattle guns.

-rb25

Edited by rb25
lmao go right ahead & spray your wheel in 2pac lmao if u got the $$$$ & powder coat tends to make the brake dust  build up of the wheels more done it my self so know about it enamel is easy to fix if u get chips & is not to costly it depends on u if your going to use the wheels on a show car & have the money to get em done in 2pac go for it or if money is a problem go for the powder coat or enamel ....

2pak is not that much different from enamels price range because enamel is on its way out and going up in price.There lots of cheap 2pak out there thats better then enamel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...