Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

woohoo, just made 370+rwkw on 23psi, pump fuel, at boostworx, looking good for the nats:)

Rb30, 850hp gt42, mv electronic jatco auto

I'd say at minimum you'll be needing a Super Street Licence (11.99 and under) and a tailshaft loop-not to mention some slicks or drag radials.

Good work.

ha,ha, yeh i know, i haven't got time to cage it either,

it made 378rkw and 640nm of torque in todays 42 degree heat

11.5 a.f ratio at peak power.,23psi, pump fuel.

I actually drive it around with rag style Et streets on the road, pointless otherwise.

see what happens, good to see we are now both pushing mikes electronic transmissions

to the max!

cheers

darren

I will have my R33 GTS 4 door out there to have a crack at an 11 second pass this year to improve on its existing 12.5. Trying to do it in full roadworthy regency approved trim too with stock GTR exhaust, airbox, filter etc. (just passed full engineering inspection last week). Just a nice tune up with our laptop Power FC software and 1.0bar of boost through the RB26 should do it :mellow:

Edited by Martin Donnon

heya martin, hows the progress with peter going on starting to work on 4WD's. ive just got a 99patrol turbo diesel wouldnt mind using it as a test mule if he/u are keen to try some stuff

cheers matt

I suppose its easier and cheaper to just dream it eh?

Always is:)be good to see anyway.

MattR throw a ls1 in it:)

Yeh i have heard that the timers may not be fixed in time, rumour mill in

real life and the internet is going crazy...time will tell i guess

cheers

darren

Trying to do it in full roadworthy regency approved trim too with stock GTR exhaust, airbox, filter etc. (just passed full engineering inspection last week). Just a nice tune up with our laptop Power FC software and 1.0bar of boost through the RB26 should do it biggrin.gif

Hmm.. full regency approved + power FC... 1.0 BAR of boost.. methinks I smell a contradiction :)

I called and asked what mods are street legal to cars the other day.. and the lady said, you can have a different exhaust so long as it's not too loud, and you can have a different intercooler + piping. Cams, turbo, fuel computers, turbos, basically anything that can make a real difference to power need to be emissions tested (3 grand, thank you very much) to see if they comply with ADR's. Basically.. err.. what was my point? Oh yes, completely street legal + 11 seconds.. I doubt it's truly possible, even in a car as mighty as the GTR... If you can do it, I mean pass a roadworthy AFTER you run an 11 second pass.. I will bow to your awesomeness!!!

Actually that would be a good way to stick it to those regency goons, try to get some fairly normal mods emissions tested, so we can all have bigger turbos etc. and have an engineers cert for it? Maybe as a group buy? :lol: We can all put in fifty bucks and put it on someones car and get it passed... ah but I bet that they require testing for each individual car *sigh*.

Hopefully my honda s2000 will be ready by then. I can't wait to get into the low 11 or better. However with the rate of work done on the car I don't think it will be able to get out of the workshop early enough for De and I to pull the head out and check the engine before 4,6&R :P

Surely they wouldnt cancel the event (outright) due to timing equipment issues? Postpone maybe, but not cancel! I certainly hope not. I'm on target to have a 'slightly larger' new turbo and manifold combo in and tuned... but a delay in the event wouldn't hurt :D

Congrats on the R31 results Darren. Shaun was telling me it's a bit hard to tame even on the ETs! Fill it up with 110 and there's 400+ to be had.

G'day Martin. You must have a new mob' or too busy at the moment? I sms'd you the other day (re a Feb06 Hot4s hose article - 'Can you write in to tell us the odd part out, though?') I can! And most of the 'odd parts' are long gone :)

Hey Matt, if you can do better than 12.74 in the TD Patrol I'll buy you a beer mate - make that a carton :O

Hard to tame....you could say that,

with et streets rags, let down to 15psi on the high boost,(23psi) it does a top fuel

style burnout in 1st 2nd and straight into top gear :rolleyes: , hopefully

gearing it up a bit helps alot. I thought the tyres were better than that :P

cheers

darren

sorry to be the bearer of bad news, but a little birdy told me that they had been either cancelled or posponed due to some timing equipment issuses....

could be bullshit... not sure

Just reading on Ausrotary.com the nationals looks to be cancelled & its more than just equipment issues :D.

doesn't mention it on the air website though?

heres a email i just received from AIR. [email protected]

As of yet the meet has not been cancelled. I have been told by management that hopefully our timing system will be repaired by then. I will be able to give you a definite yes or no on the 8th. We are flying in an expert from Melbourne to analyse the problem and hopefully rectify the major problem we have with our timing system.

Regards,

Trish

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...